Automatic Rotary 4-Pallet Changer One Shuttle - One Receiver - FOUR Pallets scheduled and ready to feed your VMC or DRILL TAP for multiple hours of unattended machining. Available in pallet sizes from 28” x 15” (711mm x 381mm) up to 50” x 24” (1270mm x 609mm) No overhead obstruction for robot or crane loading Main image shown with 50” x 24” (1270mm x 609mm) pallets and a legacy guard panel design with 2-sided light curtain. Newer models are manufactured with 3-sided light curtain guarding. Whether running high volume production of the same part or programming several different set-ups, the Automatic Rotary 4-Pallet Changer will increase operator walk-away time and maximize productivity on your new or existing vertical mill. Save money with less spindle idle time due to part change-over and quote your customers more competitively. Midaco Corporation

* Easily load and unload parts onto pallets with a crane or robot without any overhead obstruction. System includes Light Curtain shuttle guarding via light emitters, mirror and sensors. Pallet change will not occur if invisible light beam is breached. • Cast iron pneumatic receiver, with hardened and ground locating pins, mounts directly onto the machining center table. Automatic access door is retrofit to the VMC’s side panel. • Once a job cycle is complete, pallets will rotate automatically and the shuttle’s servo drive transfers the next pallet onto the receiver. • Cast aluminum pallets,...