for 5-Axis Machining CentersWork NON-STOP on 5-Axis Machining Centers. The Automatic Pallet-Cart Changer allows for uninterrupted pallet transfer with MIDACO’s train cart* system (patentpending). Each cart holds two (2) pallets and connects to additional carts* allowing for continuous part transfer in and out of the machine tool. The operator can load a train of carts* to run while they attend to other tasks or go "lights-out". Shuttle System Includes: -Automatic door retrofit to machining center - One (1) cart with two (2) 15” (381mm) dia. pallets - One (1) cast iron receiver *number of connected carts will vary depending upon the weight of parts per load. Additional carts* and pallets available separately. Midaco Corporation • www.midaco-corp.com • ph: (847) 593-8420 Fsara

Automatic Pallet-Cart Changer • Easily load and unload pallets onto carts without obstruction. • Interlocked pallet carts are mobilized through the shuttle system on casters allowing the shuttle arm to continuously feed pallets into the 5-Axis machining center. • Once a cart is pushed through the other side, the operator can easily load new pallets and change parts while the spindle Is cutting. • A completed pallet cart can be removed by unlocking the T-pins and rolled to a different location or to the opposite end of the train to keep production going. • Depending on programming, after the full...