1.0 mm (W) DC to 110 GHz Connectors

Product catalog summary

Overview: Southwest Microwave, Inc. provides high-performance 1.0 mm (W) connectors designed for frequencies ranging from DC to 110 GHz. These connectors are known for their low Voltage Standing Wave Ratio (VSWR), low insertion loss, low RF leakage, high temperature tolerance, and excellent repeatability.

Specifications:

Electrical: The connectors operate mode-free up to 110 GHz with a maximum VSWR of 1.25:1. RF leakage is ≤ -100 dB, ensuring minimal signal loss.
Temperature Range: The connectors can withstand temperatures from -55°C to +165°C.
Materials and Construction: Material specifications vary by product type, with detailed drawings available upon request.

Test Data: The document provides test data for back-to-back connector configurations, indicating a VSWR of 1.13:1 for individual connectors.

Interface Standards: The connectors conform to IEEE Std. 287, ensuring compatibility with industry standards.

Connector Types:

Flange Mount and Thread-In Connectors: Available in various configurations, including 4-hole and 2-hole flange jacks and plugs.
Adapters: Multiple adapter types are available, including 1.0 mm to 0.9 mm adapters.

Additional Features:

Cable Assemblies: Southwest Microwave offers complete cable assemblies to facilitate high-performance connections.
End-Launch Connectors: Clamp-on connectors are available for easy installation.

Graphical Data: The document includes graphs showing VSWR and insertion loss across frequencies, highlighting the performance of the connectors over the specified range.

Catalog excerpts

PERFORMANCE LEADER IN MICROWAVE CONNECTORS 1.0 mm (W) DC to 110 GHz Connectors Low VSWR Low Insertion Loss Low RF Leakage High Temperature Rugged & Durable Excellent Repeatability Southwest Microwave, Inc. +1 (480) 783-0201 | www.southwestmicrowave.com

Open the catalog to page 1

INTERFACE STANDARDS 1.0 mm (W) DC to 110 GHz Connectors 1.0 mm (W) PLUG (PIN CONTACT)TEST DATA .1674 4.25 Data shown represents two 1.0 mm (W) 9 mil pin connectors tested back-to-back. To extract VSWR data for a single connector, take the square root of the VSWR data point and divide the insertion loss data point by two. FREQUENCY (GHz) VSWR = V1.283 = 1.13:1 maximum for each connector, as shown. Contact Southwest Microwave for performance specifications for all other 1.0 mm (W) connectors. ELECTRICAL Mode Free Through 110 GHz Low VSWR: DC to 110 GHz: 1.25:1 Max Low RF Leakage: < -100 dB Low...

Open the catalog to page 2

1.0 mm (W) FLANGE MOUNT AND THREAD-IN CONNECTORS DC to 110 GHz Connectors RP .312 7.92 FLANGE JACK (FEMALE): 4 HOLE .375 SQUARE CONNECTOR NO. 2412-01SF RAISED METAL CONTACT RING (360° SURFACE CONTACT) FLANGE PLUG (MALE): 4 HOLE .375 SQUARE RAISED METAL CONTACT RING (360° SURFACE CONTACT) FLANGE JACK (FEMALE): 2 HOLE .400 X .180 RAISED METAL CONTACT RING (360° SURFACE CONTACT) FLANGE PLUG (MALE): 2 HOLE .400 X .180 RAISED METAL CONTACT RING (360° SURFACE CONTACT) THREAD-IN: STEP THREAD JACK (FEMALE): STANDARD OR METRIC REAR THREAD ACCEPTS PIN DIA. .009 .009 REAR THREAD TYPE .250-36 UNS-2A (STD)...

Open the catalog to page 3

END-LAUNCH CONNECTORS (CLAMP-ON) PIN DIAMETER Dim A Board Pin 0.005 DIELECTRIC DIAMETER REDUCED SIZE Female Male 2492-04A-6 Currently N/A GROUNDING PLATE Circuit Board THREADED CLAMPING PLATE TRANSITION BLOCK GROUNDING PLATE THREADED CLAMPING PLATE TRANSITION BLOCK Ground Plane CABLE ASSEMBLIES Southwest Microwave can supply complete cable assemblies (0.047 cable) to simplify high-performance interface to our 1.0 mm (W) Flange Mount, Thread-in and End Launch connectors. Contact the factory for more information. 1.0mm MALE 12 INCH .047 FLEXIBLE CABLE ASSEMBLY 2 INSERTION LOSS ADAPTERS 1.0 mm JACK...

Open the catalog to page 4

1.0 mm (W) DC to 110 GHz Connectors

1.0 mm (W) DC to 110 GHz Connectors

Catalog excerpts

All Microwave Product Divison catalogs and technical brochures