Density Pycnometer BELPYCNO L
4Pages

DENSITY PYCNOMETER FULLY AUTOMATED AND HIGHLY ACCURATE DENSITY MEASUREMENT

DENSITY MEASUREMENT / BELPYCNO L SHORT MEASUREMENT TIME AND FAST SYSTEM STABILIZATION FULLY AUTOMATED DENSITY MEASUREMENT OF POWDERS AND POROUS MATERIALS The BELPYCNO L allows the accurate measurement of skeleton den- utilizing a probing gas such as Helium which can reach even the small- sity of solids and powders as well as the true density of pastes and liq- est pores less than 1 nm diameter. Thus, the density of powders and porous materials can be determined exactly. The combination of an internal temperature control and an absolute pressure transducer compensates any influences from...

DENSITY PYCNOMETER BELPYCNO L ACCURATE DENSITY DETERMINATION FOR VARIOUS APPLICATIONS The BELPYCNO L pycnometer is equipped with up to 3 reference cham- Once calibrated the pycnometer carries out the analysis without any ber volumes (approx. 20, 40 and 60 cm3) in order to give the best per- concerns. No contamination risks due to gas loading from reference formance in combination with the chosen sample chamber (approx. 4, chamber (high pressure) into sample chamber (low pressure), support- 20, 40, 60, 100 and 135 cm3). Independent of ambient temperature and ed by programmable discharge...

TECHNICAL INFORMATION Results at a glance: Approx. 20, 40 and 60 cm3 Sample chamber volumes Helium (other inert gases possible) Integrated micro processor Alphanumeric foil 4-line 40 characters LCD-display with back light Flow, programmable purge cycles optional with vacuum preparation 14° C to 40° C (optional 60° C with external oven) resolution ± 0.01° C Pressure transducer Vacuum connector 2 x serial (external balance, PC-data transfer), 1 parallel (printer) Sensor (optional) MicrotracBEL Corp. 8-2-52 Nanko Higashi, Suminoe-ku Microtrac Retsch GmbH Retsch-Allee 1-5 42781 Haan Deutschland...