BELPYCNO L

Product catalog summary

Overview: The BELPYCNO L is a fully automated density pycnometer designed for accurate measurement of the skeleton density of solids, powders, pastes, and liquids. It features internal temperature control and an absolute pressure transducer to mitigate ambient temperature and pressure fluctuations.

Key Features:

Automated measurement and calibration procedures.
Short measurement time and fast system stabilization.
Built-in linearized absolute pressure transducer and automatic temperature control (ATC).
Multi-volume capability with reference chamber volumes of approximately 20, 40, and 60 cm³ and sample chamber volumes ranging from 4 to 135 cm³.
Programmable discharge restriction and paper filters to prevent contamination.

Applications: Suitable for analyzing powders, porous materials, building materials, catalysts, liquids, pastes, active carbons, food, and pharmaceuticals.

Technical Specifications:

Probe gas: Helium (other inert gases possible).
Temperature range: 14°C to 40°C (optional up to 60°C with external oven).
Pressure transducer resolution: 0.001 kPa.
Accuracy and reproducibility: 0.01%.
Interfaces: 2 serial (external balance, PC-data transfer), 1 parallel (printer).
Power supply: AC 100 - 240 V, 50/60Hz.
Dimensions: 250 mm x 330 mm x 450 mm, weight: 17 kg.

Contact Information: MicrotracBEL Corp. (Japan), Microtrac Retsch GmbH (Germany), Microtrac Inc. (USA), Microtrac Formulaction SAS (France).

Catalog excerpts

DENSITY PYCNOMETER FULLY AUTOMATED AND HIGHLY ACCURATE DENSITY MEASUREMENT

Open the catalog to page 1

DENSITY MEASUREMENT: BELPYCNO L SHORT MEASUREMENT TIME AND FAST SYSTEM STABILIZATION FULLY AUTOMATED DENSITY MEASUREMENT OF POWDERS AND POROUS MATERIALS The BELPYCNO L allows the accurate measurement of skeleton density of solids and powders as well as the true density of pastes and liquids. The combination of an internal temperature control and an absolute pressure transducer compensates any influences from ambient temperature and pressure fluctuations. DETERMINATION OF THE DENSITY OF POWDERS AND POROUS SOLIDS THE MEASUREMENT AND CALIBRATION PROCEDURES ARE FULLY AUTOMATED The BELPYCNO L is a...

Open the catalog to page 2

DENSITY PYCNOMETER BELPYCNO ACCURATE DENSITY DETERMINATION FOR VARIOUS APPLICATIONS The BELPYCNO L pycnometer is equipped with up to 3 reference Once calibrated the pycnometer carries out the analysis without chamber volumes (approx. 20, 40 and 60 cm3) in order to give the any concerns. No contamination risks due to gas loading from ref- best performance in combination with the chosen sample cham- erence chamber (high pressure) into sample chamber (low pres- sure), supported by programmable discharge restriction and easy ent temperature and pressure variations, the BELPYCNO L allows use of paper...

Open the catalog to page 3

Reference chamber volumes Approx. 20, 40 and 60 cm3 Probe gas Helium (other inert gases possible) Control Integrated micro processor Keyboard Alphanumeric foil Display 4-line 40 characters LCD-display with back light Flow, programmable purge cycles optional with vacuum preparation Temperature !4°C to 40°C (optional 60°C with external oven) resolution ± 0.0!°C Pressure transducer 0.001 kPa displayed resolution 2 x serial (external balance, PC-data transfer), 1 parallel (printer) Sensor (optional) Humidity Power supply Copyright © 2021 by Microtrac Retsch GmbH | 980.2027/E | 11-2025 MICROTRnCa...

Open the catalog to page 4

All MICROTRAC catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list