*mydirectindustry

Catalogs
Microtest Corporation
Transformer Tester 5465/5466/5467

Transformer Tester 5465/5466/5467

1 / 1 PageView full catalog

Transformer Tester 5465/5466/5467

Product catalog summary

Features

48 channels with basic accuracy up to ±0.1%.
Simultaneous display of four parameters in Meter mode.
Built-in pneumatic fixture F5648 with 100mA DC Bias.
Open circuit/short circuit function.
USB Host storage for saving settings, data, and screen captures.
Supports RS-232, Handler, LAN, and USB Host interfaces.
Suitable for transformer production lines, quality assurance, or incoming quality control departments.

Accessories / Fixtures

Optional accessories include PC Link software, RS-232 cable, Handler Box, and specific fixtures for models 5465 and 5466/5467.

Applications

Applicable to power transformers, network communication transformers, and electronic transformers.

Specifications

Model 5465: Test Frequency 10Hz-200kHz.
Model 5466: Test Frequency 10Hz-500kHz.
Model 5467: Test Frequency 10Hz-1MHz.
All models have 48 channels and a frequency resolution of 5 digits.
AC Drive Level ranges from 10mV to 2Vrms.
Turn Ratio Frequency ranges from 50Hz to 200kHz.
Output Impedance is 100Ω.
Includes LCR function and fixture F5648 with 100mA DC Bias.
Measurement parameters include Inductance, Impedance, Capacitance, Resistance, Conductance, Susceptance, Admittance, ACR, Quality Factor, Phase angle, DCR, Leakage Inductance, Turn Ratio, Balance, and Short Circuit.
Measurement ranges and accuracy vary by parameter, with basic accuracy for AC parameters at 1KHz being 0.1%.

General Information

Measurement modes include LCR and Transformer with series/parallel circuits.
Correction options for open circuit/short circuit.
Built-in storage for 128 testing files, with USB Host storage dependent on USB capacity.
Operation modes include Auto, Manual, and Remote Trigger.
Interfaces include RS-232, Handler, LAN, USB Host, and EXT. I/O.
Power supply voltage ranges from 98Vac-132Vac or 195Vac-264Vac, with a frequency of 47-63Hz and power consumption of 70VA.
Display is an 800x480 color screen, 7" TFT.
Environmental conditions: Temperature 10℃-40℃, Humidity 10-90%RH.
Dimensions are 344×145×343mm, and weight is 9kg.

Key Features

Standard accessories include a power cord, F5648, and a foot switch (F522010).

Catalog excerpts

Transformer Tester5465/5466/5467 | Accessories/Fixtures Standard - Power Cord - F5648 - Foot switch (F522010) | Features - 48 channels - Basic accuracy up to ±0.1% - Support with Meter mode function, simultaneously display four parameters - Pneumatic fixture F5648 built-in 100mA DC Bias - Open circuit/short circuit function - USB Host storage can save setting files, data and capture the screen - Support RS-232, Handler, LAN, USB Host interfaces - Using in transformer production line, quality assurance or incoming quality control department Optional - PC Link software - RS-232 cable - Handler Box - F423501 (5465) - F423901 (5466/5467) - FX-000C26 method for measuring turns ratio | Applications Power transformer, Network communication transformer, electronic transformer | Specification Transformer Tester Measurement Mode

Open the catalog to page 1

Transformer Tester 5465/5466/5467

Transformer Tester 5465/5466/5467

Catalog excerpts

All Microtest Corporation catalogs and technical brochures