*mydirectindustry

Catalogs
Microtest Corporation
LCR Meter_6370_6371_6372

LCR Meter_6370_6371_6372

Product catalog summary

Overview: The 6370/6371/6372 LCR Meters are designed for high precision measurement with a basic accuracy of up to 0.1%. They are compatible with Meter Link Software, making them suitable for production line use due to their compact design and user-friendly interface.

Key Features: The meters come with a standard power cord and user manual CD. They offer a wide measuring range for various parameters such as impedance (IZI, R, X), admittance (lYl, G, B), capacitance (Cs, Cp), inductance (Ls, Lp), dissipation factor (D), quality factor (Q), DC resistance (DCR), percentage deviation (Δ%), and phase angle (θ).

Optional Accessories: RS-232 Cable and other components are available as optional accessories.

Operating Frequency: The meters operate at different frequencies: 6370 (100Hz - 20kHz), 6371 (100Hz - 100kHz), and 6372 (100Hz - 200kHz), with a frequency resolution of 5 digits and an accuracy of ± 0.01%.

Drive Levels: AC drive levels range from 0.05V to 1V, and DC drive level is 0.5V. The output impedance is 100Ω.

Test Speed and Bias Voltage: Both AC and DC test speeds are 5 times per second, with a bias voltage of 2V.

Equivalent Circuit and Modes: The meters support series/parallel equivalent circuits and offer absolute/percentage mathematical modes. Test range can be automatic or locked.

Indicators and Output: Indicators include Pass/Fail/Bias LED and a built-in speaker. Output terminals use BNC connectors.

Safety and Calibration: The meters comply with EN61010-1 safety standards and support open/short circuit calibration to avoid misreading due to stray capacitance.

Power Supply: Voltage is selectable between 90-132Vac or 198-264Vac, with a frequency of 47-63Hz.

Display and Interface: The meters feature a 240x64 dot-matrix display and interfaces include RS-232, optional GPIB, and handler options.

Memory and Operation: They have flash memory for storing 127 rewritable data sets and support auto, manual, remote control, RS-232, and optional GPIB operation.

Environmental Conditions: Operating temperature is 10-40℃ with humidity levels of 20-90% RH.

Dimensions and Weight: The meters measure 335x100x322 mm and weigh 5 kg.

Catalog excerpts

Component Tester LCR Meter 6370/6371/6372 Accessory Key Feature Standard Power cord User manual CD F423501 Basic accuracy up to 0.1% LCR Meters are all compatible with convenient and efficient Meter Link Software Overall Compact design, good for production line use User-friendly interface, allows for production line personnel to operate efficiently

Open the catalog to page 1

Operating Frequency 100Hz - 200kHz　390 points Component Tester Component Tester Output Impedance Frequency Resolution Bias Voltage Basic Accuracy Equivalent Circuit Series / Parallel Mathematical Mode Absolute / Percentage Test Range Automatic / Lock Pass / Fail / Bias LED / Built-in speaker Output Terminal Open Circuit / Short Circuit: Avoid the misreading caused by the stray capacitance from kelvin clips and fixtures Power Supply Flash Memory Storage of 127 rewritable data sets

Open the catalog to page 2

All Microtest Corporation catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list