*mydirectindustry

Catalogs
Microtest Corporation
Impedance Analyzer_6377/6378/6379

Impedance Analyzer_6377/6378/6379

Product catalog summary

Overview: The document provides technical specifications and features of the Impedance Analyzer models 6377, 6378, and 6379, designed for precise measurement and analysis of electrical components.

Specifications:

Basic Accuracy: Up to 0.1%.
Operating Frequency: 6377: 20Hz - 1MHz, 6378: 20Hz - 5MHz, 6379: 20Hz - 10MHz.
AC Drive Level: 10mV-2Vrms with 1mVrms steps.
DC Drive Level: 0.01V-2V with 100Ω output impedance.
Frequency Resolution: 5 Digits, ±0.01%.
AC Test Speed: 75ms, DC Test Speed: 30ms.
Bias Voltage: 2V.
Equivalent Circuit: Series/Parallel.
Test Range: Automatic/Lock.
Mathematical Mode: Absolute/Percentage.
Indicators: Pass/Fail/Bias LED, Built-in speaker.
Output Terminal: BNC Connector.
Calibration: Open Circuit/Short Circuit to avoid misreading from stray capacitance.
Auto-save Function: Data is automatically saved and recovered after power outages.
Safety Standard: EN61010-1.
Power Supply: Voltage 90-132Vac or 198-264Vac (selectable), Frequency 47-63Hz.
Display: 320x240 dot-matrix display.
Interface: RS-232, optional GPIB, and Handler.
Flash Memory: 64 groups of multi-step settings, each containing up to 30 steps.
Operation Modes: Auto, Manual, RS-232, optional GPIB, and Handler.
Environmental Conditions: Temperature 10-40°C, Humidity 20-90%RH.
Dimensions and Weight: 337x145x522 mm, 6.5 Kg.

Key Features:

Synchronous tests with multiple parameter settings.
Graphic scanning analysis function.
Wide range of measurement functions including frequency to 5 digits.
DC Bias for progressing current scanning analysis.
Fixture design capabilities and customized services for clients.

Measurement Ranges:

IZI, R, X: 0.1mΩ - 100MΩ.
lYl, G, B: 10nS - 1000S.
Cs Cp: 0.01pF - >1F.
Ls Lp: 0.01nH - 100kH.
D: 0.00001 - 9.9999.
Q: 0.1 - 9999.9.
DCR: 0.1mΩ - 100MΩ.
Δ%: -999.99% - 999.99%.
θ: -180° - +180°.

Accessories: Standard power cord, user manual CD, optional Meter Link Software, RS-232 Cable, and Handler Box.

Catalog excerpts

Component Tester dance Analyzer Accessory Key Feature Basic accuracy up to 0.1% Synchronous tests with multiple parameter settings Graphic scanning analysis function Measurement of wide range of functions: Freq. to 5 Digits Collocating DC Bias to progressing current scanning analysis Fixture design capabilities, Specific customized services for clients Standard Power Cord User Manual CD F423901 Optional Meter Link Software RS-232 Cable Handler Box F423905 F423503 Measuring Range

Open the catalog to page 1

Impedance Analyzer Operating Frequency Basic Accuracy Frequency Resolution Bias Voltage Component Tester Component Tester Output Impedance Equivalent Circuit Series / Parallel Test Range Automatic / Lock Mathematical Mode Absolute / Percentage Pass / Fail / Bias LED / Built-in speaker Output Terminal Open Circuit / Short Circuit: Avoid the misreading caused by the stray capacitance from kelvin clips and fixtures Auto-save function When the power is turned off or encounter a power outage, all the data will be saved automatically and recovered when tester system is switched on again Power Supply...

Open the catalog to page 2

All Microtest Corporation catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list