Specifications:
The 6630/6632 Precision Impedance Analyzers offer a frequency range from DC to 30MHz, with signal levels from 10mV to 2V and 200µA to 20mA. They provide a basic impedance measurement accuracy of ±0.08% and feature automatic level control (ALC). The output impedance is switchable between 25Ω and 100Ω. These analyzers support dielectric and magnetic coefficient measurements and offer fast measurement speeds of less than 3ms.

Features:
Key features include open/short/load calibration, multi-parameter measurement in meter mode, automatic component classification, built-in DC bias voltage from -12V to +12V, and multiple interfaces (USB, GPIB, RS232, LAN) for automation and data access. The devices are designed for low power consumption (<30W) and operate silently without a fan.

Measurement Capabilities:
The analyzers can measure a wide range of parameters including impedance (|Z|), admittance (|Y|), phase angle (θ), reactance (X), resistance (R), conductance (G), susceptance (B), inductance (L), dissipation factor (D), quality factor (Q), DC resistance (DCR), capacitance (C), and equivalent series resistance (ESR). They also support equivalent circuit modeling with seven different models.

Applications:
These analyzers are suitable for testing passive components like capacitors, inductors, resistors, transformers, ceramic resonators, and quartz crystals, as well as semiconductor components like varactor diodes. They can also evaluate dielectric materials such as plastics and ceramics, and magnetic materials.

Interface and Software:
The devices offer comprehensive interface options including USB, LAN, GPIB, and RS232. Optional PC link software is available for data analysis and report generation, supporting CPK process capability analysis and Excel file conversion.

Physical and Environmental Specifications:
The 6630 model measures 336x147x340 mm and weighs 3 kg, while the 6632 model measures 359x147x343 mm and weighs 3.95 kg. They operate in temperatures from 10°C to 40°C with a humidity of ≤80% RH, and require a power supply of 90-264Vac at 47-63Hz.