MKS 222 1/2“ Microphone Capsule for low-frequency application • WS2F acc. IEC 61094-4 • free-field • 0,5 Hz to 20 kHz • 15 dBA to 149 dB • 200 V polarization The 1/2“ microphone capsule MKS 222 has an extended low-frequency range and is therefore optimized for correct acoustic measurements of signals with very low frequencies. The equalization of the static air pressure is by means of a capillary to the preamplifier (rearvented). The microphone capsule is suitable for sound level meters of Type 1 acc. IEC 61672. Delivery Microphone capsule, stainless steel in wooden case 90 mm x 90 mm x 40 mm Options and Accessories Protection grid for rugged environment instead of standard protection grid Electrostatic actuator instead of standard protection grid Adapter for 1/2“microphone capsules to 1/4“preamplifiers Angle adapter 1/2“ Dehumidifier adapter 1/2“ Windsc

Technical Specifications Transducer type Frequency range zero degree incidence Open-circuit sensitivity Open-circuit sensitivity Max. SPL for 3% THD at 1 kHz Inherent noise Polarization voltage Capacitance at 1 kHz Temperature range, operation Temperature range, storage Temperature coefficient Static pressure coefficient Diameter Capacitive pressure transducer 0.5 Hz to 20 kHz re 1 V/Pa Peak, with MV 203 @ 120 V RMS, with MV 203 @ 120 V with MV 203 without protection grid with protection grid Length Weight Preamplifier thread Protection grid thread Typical frequency response Microtech Gefell GmbH...