M Cube Microphone System for 3D recordings in time delay stereophony • condenser microphones • omni-directional • measurement quality capsules • nickel diaphragms • transistor pre-amplifier • phantom p

Microphone System M Cube The M Cube is a 9-channel microphone system for timedelay based 3-dimensional recordings. The nine microphones are arranged in the shape of a cube with a length of approximately one metre each side. The positions of the microphones are adjustable – so the dimensions of the microphone arrangement can be adjusted to the dimensions of the room and the sound source. The mounting bars have distance markings, so that any setting can easily be repeated. The M Cube is set up as a 5.0 array with another four microphones for height information. Five M 102 capacitor microphones...

Polar pattern Acoustic operating principle Frequency range Sensitivity at 1 kHz Output impedance Noise level omni Pressure transducer 20 Hz to 20,000 Hz 50 mV/Pa 100 Ohm 23 dB 11 dB-A 83 dB-A 136 dB 125 dB 48 V ±4 V 5.5 mA XLR3M 210 g 180 mm 23.8 mm 21.0 mm Signal-to-noise ratio Max. SPL for 0.5% THD Dynamic range Power supply Current consumption Output connector Weight Length Capsule diameter Pre-amplifier diameter Frequency response and polar pattern

Polar pattern Acoustic operating principle Frequency range Sensitivity at 1 kHz Output impedance Noise level omni Pressure transducer 20 Hz to 20,000 Hz 50 mV/Pa 100 Ohm 28 dB 15 dB-A 79 dB-A 136 dB 121 dB 48 V ±4 V 5.5 mA XLR3M 123 g 170 mm 12.7 mm 21.0 mm Signal-to-noise ratio Max. SPL for 0.5% Klirrfaktor Dynamic range Power supply Current consumption Output connector Weight Length Capsule diameter Pre-amplifier diameter Frequency response and polar pattern 5 dB 0 -5 -10 -15

Product Overview Delivery Microphone system for 3D-Array 9.0, with 5 microphones M 102 and 4 microphones M 221, 9 microphone holders MH 93.1, 4 equalisation balls KA 3 and 4 equalisation balls KA 4 in aluminium case 450 mm x 350 mm x 160 mm dark bronze Microphone bar system for 3D-Array 9.0, with 16 microphone bars, 4 T-pieces, 2 connecting pieces, 2 connecting pieces for 3D-array in aluminium case 690 mm x 405 mm x 160 mm black anodized

Product Overview Accessories Windscreen, anthracite Windscreen, anthracite Equalisation ball for M 221, 30 mm black Equalisation ball for M 221, 40 mm black Microphone holder, dark bronze 3D-array connecting piece, black anodised Microphone bar, 57 cm long, complete with 2 mounting bolts black anodised, mounting bolts are green anodised Microphone bar T-piece, complete with 2 mounting bolts black anodised, mounting bolts are green anodised Microphone bar connecting piece complete with 2 mounting bolts black anodised, mounting bolts are green anodised Microphone bar suspension, complete with mounting...

Microtech Gefell GmbH · Georg-Neumann-Platz · 07926 Gefell · Germany Phone +49 (0)36649 882-0 · Fax +49 (0)36649 882-11 · www.microtechgefell.de · [email protected]