*mydirectindustry

Catalogs
microSYST Systemelectronic
Pulse Counter (software version)

Pulse Counter (software version)

Product catalog summary

General Overview:
This manual provides comprehensive instructions for the migan and migra large format LED displays equipped with pulse counters. These devices incorporate various inputs, including counting, reset, and preset inputs, as well as relay outputs for managing external peripherals.

Technical Specifications:
The displays are available in two formats: 7-segment LED (migan) and LED dot matrix (migra), with character heights ranging from 60 mm to 250 mm. They offer multiple display colors and configurations, including single or double-sided views, and operate on various voltages with protection ratings of IP54 or IP65.

Signal Descriptions:
The devices support pulse, incremental, and control inputs for reset and preset functions. The counting direction can be modified via PC software, and the devices can process pulse frequencies up to 1 MHz.

Device Configuration:
Both migan and migra models allow for customizable configurations, including character height, number of digits, display color, and housing material. Operating voltage and temperature ranges are also adjustable.

Connector Pin Assignments:
The manual specifies pin assignments for power supply, pulse and control inputs, relay outputs, and download interfaces, detailing configurations for 3-pin, 7-pole, and 9-pin connectors.

Housing Dimensions:
Dimensions for both migan and migra models are provided, with options for different pixel sizes.

Appendix:
The appendix includes a declaration of conformity, maintenance and care instructions, guarantee information, and an overview of available versions.

Product Standards and Specifications:
The document outlines compliance with product standards such as EN 55011 group 1/2, class A, and EN 55022 for limit values, as well as the interference immunity standard EN 50082-2 and regulations by guideline 89/336/EWG and EMVG.

Maintenance and Care Instructions:
For optimal performance, the display housing should be accessible for maintenance with adequate ventilation. Avoid direct sunlight and bright light sources to prevent display quality impairment. The device should be turned off before cleaning and protected from excessive humidity, vibration, and extreme temperatures. Damaged devices or power cables should not be used, and unauthorized repairs void the warranty.

Guarantee Terms:
The product is guaranteed against defects present at delivery, with a requirement for defect notification within two weeks of identification. The guarantee excludes defects from improper use or handling. If the device was tested before purchase, it is considered "used" and sold "as is," with no guarantee claims applicable.

Version Overview:
The document provides a version history with dates and descriptions of changes, such as voltage output adjustments, housing dimension changes, and input impedance specifications.

Certification:
The product is certified per DIN EN ISO 9001:2000.

Catalog excerpts

migan/migra IZ Large Format LED Display with Pulse Counter microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden +49 961 39166-0, +49 961 39166-10, [email protected], www.microsyst.de User’s Manual

Open the catalog to page 1

migan/migra IZ Large Format LED Display with Pulse Counter Page 2 microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden +49 961 39166-0, +49 961 39166-10, [email protected], www.microsyst.de Table of Contents 1 GENERAL 3 2 OVERVIEW 4 3 TECHNICAL DATA 5 3.1 Tips for the Start-up 6 3.2 Description of the Signals 7 3.3 Pulse Diagrams 8 3.3.1 Pulse Input 8 3.3.2 Counting Direction Input as Counting Input 9 3.3.3 Incremental Input 9 3.3.4 Control Inputs 10 3.4 Device Configuration migan 11 3.5 Device Configuration migra 12 4 CONNECTOR PIN ASSIGNMENTS 13 5 HOUSING DIMENSIONS 17...

Open the catalog to page 2

migan/migra IZ Large Format LED Display with Pulse Counter Page 3 microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden +49 961 39166-0, +49 961 39166-10, [email protected], www.microsyst.de 1 General This manual describes the „migan“ and „migra“ LED large format display with pulse counter. The following inputs are integrated: · Two counting inputs or counting input and counting direction (pulse counter) or input for incremental position encoder (2 phase-delayed signals) · Reset- and preset input · Reset inputs for relay outputs The configuration of the counter happens with...

Open the catalog to page 3

migan/migra IZ Large Format LED Display with Pulse Counter Page 4 microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden +49 961 39166-0, +49 961 39166-10, [email protected], www.microsyst.de 2 Overview migan/migra IZ Pulse input Incremental input (optional) Reset/Preset Counting input / Counting direction Reset inputs for outputs (optional) 2 relay outputs (optional) BCD preselection inputs (optional) Voltage outputs (optional)

Open the catalog to page 4

migan/migra IZ Large Format LED Display with Pulse Counter Page 5 microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden +49 961 39166-0, +49 961 39166-10, [email protected], www.microsyst.de 3 Technical Data Display type: 7 segment LED (migan), LED dot matrix (migra) Character height: 60 mm, 100 mm, 150 mm, 200 mm, 250 mm (each at the 7 segment display) Digits: 1 to 9 Display colour: red, green, yellow (green and yellow only at the dot matrix display) Decimal point: configurable position View: single or double sided Inputs: Pulse input, input for counting direction, inputs...

Open the catalog to page 5

migan/migra IZ Large Format LED Display with Pulse Counter Page 6 microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden +49 961 39166-0, +49 961 39166-10, [email protected], www.microsyst.de 3.1 Tips for the Start-up · When putting on the power supply, the following sequence has to be observed: o Connect the power supply cable to the display. o Connect the power supply cable to the power supply. · When disconnecting the power supply, the following sequence has to be observed: o Disconnect the power supply cable from the power supply. o Disconnect the power supply cable from...

Open the catalog to page 6

migan/migra IZ Large Format LED Display with Pulse Counter Page 7 microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden +49 961 39166-0, +49 961 39166-10, [email protected], www.microsyst.de 3.2 Description of the Signals Pulse input, UP / DOWN switching The display counts at an increasing resp. decreasing flank (adjustable with PC software) at the pulse input · with UP / DOWN switching = HIGH (+24 VDC): upwards (standard configuration) · with UP / DOWN switching = LOW (0 V): downwards (standard configuration) Incremental input Differential inputs (5 V level) for two phase-delayed...

Open the catalog to page 7

migan/migra IZ Large Format LED Display with Pulse Counter Page 8 microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden +49 961 39166-0, +49 961 39166-10, [email protected], www.microsyst.de 3.3 Pulse Diagrams 3.3.1 Pulse Input Signal level and signal frequency: Counting behaviour: *: The direction switching could possibly be executed a few milliseconds after changing the level. Uhigh = 24 VDC Ulow = 0 VDC f = 0 Hz to 1 MHz

Open the catalog to page 8

migan/migra IZ Large Format LED Display with Pulse Counter Page 9 microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden +49 961 39166-0, +49 961 39166-10, [email protected], www.microsyst.de 3.3.2 Counting Direction Input as Counting Input Signal level and signal frequency: 3.3.3 Incremental Input At the incremental inputp, the counting direction depends on the phase shift of the two signals. The maximum frequency of a single input is 1 MHz. If pulse channel A hurries ahead the channel B by 90 degrees (like in the picture above), an UP-counting happens. If channel B hurries...

Open the catalog to page 9

migan/migra IZ Large Format LED Display with Pulse Counter Page 10 microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden +49 961 39166-0, +49 961 39166-10, [email protected], www.microsyst.de 3.3.4 Control Inputs Reset input, preset input, reset relay 1(optional), reset relay 2(optional): The pulse duration ti must take 100 ms for each of these inputs at least. ti = pulse duration Uhigh = 24 VDC Ulow = 0 VDC

Open the catalog to page 10

migan/migra IZ Large Format LED Display with Pulse Counter Page 11 microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden +49 961 39166-0, +49 961 39166-10, [email protected], www.microsyst.de 3.4 Device Configuration migan Character height: 60 mm 100 mm 150 mm 200 mm 250 mm Number of digits: 1 2 3 4 5 6 7 8 9 Display colour: red green yellow Dimensional display: _________________ View: single sided double sided Operating voltage: 230 V / 50 Hz 110 V / 60 Hz 24 V DC Protection: IP54 IP65 Operating temperature: 0 to +50 °C -25 to +50 °C Housing dimension: _________x_________x_________mm...

Open the catalog to page 11

migan/migra IZ Large Format LED Display with Pulse Counter Page 12 microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden +49 961 39166-0, +49 961 39166-10, [email protected], www.microsyst.de 3.5 Device Configuration migra Pixel resolution (horizontal x vertical): ________x________ Display colour: red green yellow View: single sided double sided Operating voltage: 230 V / 50 Hz 110 V / 60 Hz 24 VDC Protection: IP54 IP65 Operating temperature: 0 to +50 °C -25 to +50 °C Housing dimension: _______x_______x_______mm Housing colour: RAL _____________ Housing material: Aluminium...

Open the catalog to page 12

Pulse Counter (software version)

Pulse Counter (software version)

Catalog excerpts

All MicroSYST Systemelectronic catalogs and technical brochures

Archived catalogs