PMF300

PMF300

Product catalog summary
Technical Specifications:
  • The PMF-30 kN model is equipped with a load cell.
  • Machine speed is adjustable via a touch screen.
  • Piece and cycle counters can be adjusted by the operator.
  • Slow-motion of the crosspiece is possible for easier assembly.
  • Electrical continuity checks for spring breakage are conducted on each installed spring.
  • Stroke regulation is achieved through an eccentric lever, with the ability to control stroke value from the display.
Fatigue Testers PMF:
  • Designed for high-speed cycle tests of compression and extension springs.
  • Maximum speed rate: 1100 RPM (Max 12 mm) and 1800 RPM (Max 9 mm).
  • Spring outer diameter range: Max 26 mm / 1’’ (12 pcs) and Max 40 mm / 1.6’’ (8 pcs).
  • Adjustable test stroke: 0 ÷ 310 mm / 0 ÷ 12.20’’ and 0 ÷ 500 mm / 0 ÷ 19.68’’.
  • Dimensions: 650 x 1000 x 1800 H mm / 25.59 x 39.37 x 70.87 H’’.
  • Highest load each spring: 1000 N / 224 lb, 500 N / 112 lb, 30 kN / 6800 lb.
  • Highest total load: 6000 N / 1300 lb, 4000 N / 900 lb, 60 kN / 13600 lb.
  • Real power consumption: 400 W at max speed, 1.5 kW at max speed.
  • Low energy consumption is emphasized.
See more

Catalog excerpts

PMF300-1

FATIGUE TESTERS PMF PMF300 Machine for high speed cycle tests of compression and extension springs Maschine fur schnelle Ermudungsprufungen an Zug - und Druckfedern Machine d’essai de fatigue pour ressorts de traction et compression Technical specifications: • Speed of the machine adjustable by touch screen • Piece and cycle counters are adjustable by operator • Possibility to have the slow-motion of the crosspiece • Electrical continuity check for spring breakage on each single installed spring • Stroke regulation through eccentric lever • Possibility to control the stroke value from display Technische eigenschaften: • Motorgeschwindigkeit regelbar von der Konsole • Stuckzahler und Zyklusanzahl lassen sich programmieren • Man kann eine langsamere Bewegung des Quarbalkens durch Pfeiltaste erlangen und die Maschine in Kraft fur eine leichtere Montage stoppen • Es gibt eine elektrische uberwachung des Bruches jeder einzelner Feder mit sofortigem Maschinenhalt • Hubeinstellung durch Excenterscheibe • Man kann den Wert der Hube vom Display uberprufen Caracteristiques techniques: • Vitesse reglable de la consolle • Compteur de pieces et programmation du nombre de cycles • Possibility de deplacement lent, pour la mise en place des pieces • Systeme electrique permettant de determiner le ressort qui casse et arret automatique de la machine, comptage du nombre de cycles realises • Reglage de la course par excentrique • Possibility de visualiser la course a l'ecran Max speed rate Hochste Maschinengeschwindigkeit Nombre de cycles Highest load each spring Max einzelne Kraft fur jede Feder Effort maxi par ressort Spring OD range Feder OD Diametre exterieur Average spring length in test Mittlere Federlange in Prufung Longueur moyenne du ressort Adjustable test stroke Regelbarer Prufungshub Course reglable Dimensions MaschinenabmaBe Encombrement Highest total load Max Gesamtkraft Capacite totale Real power consumption Energieverbrauch Consommation d’energies *The model PMF-30 kN is equipped with load cell *Das Model PMF-30 KN ist mit Kraftmessdose ausgerustet *Le modele PMF-30 KN est equipe de capteur de charge

 Open the catalog to page 1

All MicroStudio S.r.l catalogs and technical brochures

  1. CAL280

    1  Page

  2. CAL280

    1  Page

  3. ASC1000

    1  Page

  4. MC54-30

    6  Pages

  5. MCF

    1  Page

  6. FEN

    1  Page

  7. ASC1000-SP

    1  Page

  8. ASC20-SP

    1  Page

  9. ASC100

    1  Page

  10. LED50

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.