*mydirectindustry

MC54-30

Product catalog summary

Overview: The MC54 series is a high-performance automatic machine designed for the 100% testing of ground compression springs. It offers low energy consumption and is available in various models, each tailored to specific testing needs.

Testing Capabilities:

Spring free length measurement
Load testing at different prearranged lengths
Length measurement at different prearranged loads
Spring rate determination
Solid length measurement
Optional tests include ground surface measurement and sorting using a camera, and internal diameter checks.

Working Features:

Loading can be automatic or manual.
All parameters are stored in the system for setting.
Load tests are conducted at high speed in dynamic mode.
Sorting options include 3 or 5-way pneumatic or motorized sorters.

Technical Specifications:

Maximum spring length before setting varies by model, with a recommended maximum of 90 mm for some models.
Maximum outer diameter ranges from 12 mm to 120 mm depending on the model.
Setting force and load capacity vary significantly across models, with maximum setting forces ranging from 300 N to 80 kN.
Minimum recommended load and optional second load cell capacities are specified for each model.
Length resolution is typically 0.005 mm, with some models offering 0.01 mm.
Equipped with motorized or pneumatic sorters depending on the model.
Real power consumption ranges from 225 W to 900 W, with production speeds varying from 800 to 6000 pieces per hour.

Additional Features:

Optional shock absorber system available to reduce minimal solid setting load.
Manual and automatic feeding modes are supported.

Catalog excerpts

SETTING AND LOAD TESTERS Spring setting and load testing machine for the automatic test of 100% of ground compression springs Hochleistungs-Setz und Pufwaage fur automatische 100% Prufung von Druckfedern Machine automatique pour le blocage et le controle de charge de 100% de la production des ressorts , SI Approach speed and return , S2 Speed during force measurement , S3 Speed during solid length MicroSludio MADE IN ITALY

Open the catalog to page 1

SETTING AND LOAD TESTERS Testing possibilities: • Spring free length • Load at different prearranged lengths • Length at different prearranged loads • Spring rate • Solid length Optional test: • Ground surface measurement and sorting using a camera • Check of internal diameter Working features: • Loading: automatic or by manual feeding • Setting: all the parameters are stored in the plan • Load test: is carried out in a high speed in dynamic mode • Selection: by 3 or 5 ways (option) pneumatic or motorized sorter Messmoglichkeiten: • Federfreilange • Federkraft zu bestimmter Lange • Federlange...

Open the catalog to page 2

SETTING AND LOAD TESTERS

Open the catalog to page 3

SETTING AND LOAD TESTERS MicroSludio MADE IN ITALY

Open the catalog to page 4

SETTING AND LOAD TESTERS — 3 LINES SPECIAL MicroSludio

Open the catalog to page 5

Manual / Automatic Manual / Automatic Manual / Automatic Manual / Automatic SETTING AND LOAD TESTERS *Available a shock absorber system to reduce the minimal solid setting load *Stoßdämpfer-System, um auf eine minimale Festeinstellungslast zu reduzieren *Possibilité de système d'amortisseur pour réduire la charge mini de blocage Cadence indicative Mögliche Produktionsgeschwindigkeit je nach Federbeschaffenheit Real power consumption Energieverbrauch Consommation d’énergies Typical production speed Equipped with sorter Sortierweiche Tri Length resolution Längengauﬂösung Précision sur la mesure...

Open the catalog to page 6

MC54-30

MC54-30

Catalog excerpts

All MicroStudio S.r.l catalogs and technical brochures