Catalogs >
MicroStrain >
WSDA® -1000 Wireless Sensor Data Aggregator

WSDA® -1000 Wireless Sensor Data Aggregator
2Pages

Catalog excerpts

WSDA® -1000 Wireless Sensor Data Aggregator - 1

Data Sheet Wireless Sensor Data Aggregator With 600 MHz XScale and 2 GB Flash The Wireless Sensor Data Aggregator (WSDA® -1000) is a single-board computer with ethernet connectivity designed to collect data from networks of distributed wireless sensors. The WSDA®-1000 is capable of collecting data from a wide range of MicroStrain® wireless sensor nodes operating in LDC or Synchronized sampling mode.The wireless sensor network can be set up and controlled remotely via MicroStrain® NodeCommander® software. Once set up, the WSDA® -1000 may operate in one of three distinct modes: SensorCloud® Enabled, LAN (Local Area Network), and Features & Benefits • minimal setup required; collect data within minutes • autonomously aggregates wireless sensor data • supports a wide range of MicroStrain® wireless sensor nodes transmitting in LDC or Synchronized Sampling modes • 2 GB non-volatile embedded flash for local storage • command, control, and monitoring of a remote wireless sensor network from your PC • web interface for system configuration • three modes of operation: SensorCloud®, LAN, Standalone • full industrial temperature range supported (-40 °C to 85 °C) SensorCloud Upload Enabled • seamlessly integrates with SensorCloud® for world-wide data • includes a free basic SensorCloud® account • local storage is used for SensorCloud® caching • structural health monitoring • condition based monitoring of high value assets • environmental monitoring • food processes & cold-chain management System Overview The wireless sensor network can be setup, modified, and monitored using the WSDA® -1000 in conjunction with MicroStrain® NodeCommander® software.This capability enables the user to remotely control the WSN from any PC provided sufficient network access is available. SensorCloud® Enabled Optionally, the WSDA® -1000 seamlessly integrates with SensorCloud®, a unique data visualization application, which allows the user to navigate through gigabytes of data within seconds and quickly drill down to points of interest. If enabled, sensor data is autonomously and securely pushed up to SensorCloud® periodically. Data is locally cached in case of Internet connectivity disruption thereby safeguarding data integrity. The WSDA® -1000 comes with a free basic account on SensorCloud®, and the upload option is available within the Local Data Acquisition on a LAN If SensorCloud® upload is disabled, the WSDA® -1000 may act as an autonomous data logger on a LAN with a DHCP server. In this mode, the WSDA® -1000 only stores data on locally on the 2 GB embedded flash. Data can be downloaded and cleared from the WSDA® -1000 using the download tool. Standalone Mode If a LAN with a DHCP server is unavailable, the WSDA® -1000 may also operate autonomously as a wireless sensor network data logger. In this mode, the WSDA® -1000 stores data locally on the 2 GB embedded flash. Using the WSDA® downloader tool with a crossover Ethernet cable, the user can download and clear data from the WSDA® -1000. This is useful in applications where network access is unavailable. Í MicroStrain* Little Sensors, Big Ideas.

Open the catalog to page 1

WSDA® -1000 Wireless Sensor Data Aggregator - 2

WSDA® -1000 Wireless Sensor Data Aggregator With 600 MHz XScale and 2 GB Flash MicroStrain®, WSDA®, Node Commander®, V-Link®, SG-Link®, G-Link®, TC-Link®, XRS™, SensorCloud®, DVRT-Link™ and EH-Link® are trademarks of MicroStrain, Ine Specifications are subject to change without notice. Draft 1.01 e Patent Pending

Open the catalog to page 2