Catalogs >
MicroStrain >
DVRT-Link? -LXRS®

DVRT-Link? -LXRS®
2Pages

Catalog excerpts

LORD PRODUCT DATASHEET DVRT-Link™ -LXRS Wireless Displacement Node The DVRT-Link™-LXRS™Wireless Displacement Node supports a wide range of inductive displacement transducers including all of the LORD MicroStrain® DVRT®sensors. DVRT-Link™-LXRS™combines LORD MicroStrain®'s DEMOD-DC®signal conditioner, its wireless technologies and an internal rechargeable battery to allow remote, long term monitoring of microminature displacement measurements The node can simultaneously log data to internal memory and/or transmit real-time data to a host computer at user programmable data rates up to 4096 Hz. Node Commander® software supports configuration of the wireless node including discovery, initialization, radio frequency, sample rate, reading/writing to node EEPROM, calibrating node sensors, managing node batteries including sleep, wake, and cycle power, and upgrading node firmware. The DVRT- Link™-LXRS™ is compatible with any WSDA® -Base, WSDA® -1000 or Features & Benefits High Performance • Quick wireless deployment of LORD MicroStrain® DVRT® • Scalable, ultra-long-range wireless sensor network • Lossless data throughput under most operating conditions • Low-power for extended battery life • SensorCloud - integrated web solution • Rapidly deployable wireless form factor • Simple integration supported by comprehensive SDK Cost Effective • Reduced cost and rapid time to market for customer's • Aggressive volume discount schedule Robotics and machine control Linear/angular positioning of optical components Quality control Production Process Monitoring Structural load and stress monitoring System Overview At the heart of LORD MicroStrain®'s LXRS™ Lossless Data Wireless Sensor Networks are WSDA® gateways, which use our exclusive beaconing protocols to synchronize precision timekeepers within each sensor node in the network. The WSDA® also coordinates data collection from all sensor nodes. Users can easily program each node on the scalable network for simultaneous, periodic, burst, or data logging mode sampling with our Node Commander® software, which automatically configures radio communication to maximize the aggregate sample rate. Optional SensorCloud™ enabled WSDA® support autonomous web-based data aggregation. WSDA» -Base WSDA" Base Phones & Tablet Wireless Sensor Network (WSN) SENSING SYSTEMS

Open the catalog to page 1

DVRT-Link™ -LXRS™ Wireless Displacement Node Specifications Input channels 1 inductive (DVRT® displacement transducer), and internal temperature sensor Temperature sensor -40 °C to 70 °C range, typical accuracy ±2 °C (at 25 °C) Signal to noise ratio 1,000 : 1 typical (factory calibrated with DVRT® sensor) regulated sinewave, 150 kHz standard; other frequencies available on request 800 Hz standard; factory adjustable 10 Hz – 20 kHz Analog to digital (A/D) converter successive approximation type, 12 bit resolution Data storage capacity 2 megabytes (approximately 1,000,000 data points)...

Open the catalog to page 2