Extract from our online catalogue: wms ultrasonic sensors Current to: 2025-01-27 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E [email protected] microsonic® is a registered trademark of microsonic GmbH. All rights reserved.

The wms sensors are designed for use in microprocessor controllers with signal evaluation performed by the customer. HIGHLIGHTS > Trigger input > for control of the ultrasonic transmitter > Echo output > for customer-provided evaluation in the controller > 1 echo output > with a load up to 10 mA > 5 detection ranges with a measurement range of 30 mm to 8 m micro/onic wms ultrasonic sensors

Description The wms sensors require connection to the customer's own control and signal evaluation equipment. wms - the inexpensive alternative to a self-contained sensor when the sensor must be controlled by the customer's system. A microprocessor control is normally required for this. The "transmitter" signal input briefly has to be set to -UB by the control unit via an open-collector circuit. As a result, an the wms sensor emits a sound pulse for the time of this signal. The "echo" signal output subsequently transmits all echo signals received depending on their duration as 1 bit values (echo...

detection zone scale drawing JLTL echo output measuring range design operating mode ultrasonic-specific means of measurement transducer frequency blind zone operating range maximum range reproducibility accuracy 30 - 350 mm cylindrical M18 sensor for evaluators echo propagation time measurement electrical data operating voltage Ub 10 - 30 V d.c., reverse polarity protection no-load current consumption < 30 mA type of connection 4-pin M12 initiator plug

output 1 signal output echo PnP: 1 max — 10 mA (signal output echo) recommended transmitted pulse length 25 ps recommended measuring cycle time 8 ms description controlled by open collector (npn), IC > 3 mA, UCE > 30 V input 1 signal input - transmitter ultrasonic transducer operating temperature storage temperature further versions further versions brass sleeve, nickel-plated, plastic parts, PBT polyurethane foam, epoxy resin with glass contents IP 65 technical features/characteristics temperature compensation controls scope for settings Synchronisation multiplex indicators micro/onic wms ultrasonic...

The content of this document is subject to technical changes. Specifications in this document are presented in a descriptive way only. They do not warrant any product features.

detection zone scale drawing JLTL echo output measuring range design operating mode particularities ultrasonic-specific means of measurement transducer frequency blind zone operating range maximum range reproducibility accuracy 30 - 350 mm cylindrical M18 sensor for evaluators stainless steel version echo propagation time measurement electrical data operating voltage UB 10 - 30 V d.c., reverse polarity protection no-load current consumption < 30 mA type of connection 4-pin M12 initiator plug

output 1 signal output echo pnp: Imax = 10 mA (signal output echo) recommended transmitted pulse length 25 ps recommended measuring cycle time 8 ms description controlled by open collector (npn), Ic > 3 mA, Uce > 30 V input 1 signal input - transmitter ultrasonic transducer max. tightening torque of nuts class of protection to EN 60529 operating temperature storage temperature weight further versions stainless steel, plastic parts, PBT polyurethane foam, epoxy resin with glass contents 15 Nm IP 65 technical features/characteristics temperature compensation controls stainless steel version micro/onic...

The content of this document is subject to technical changes. Specifications in this document are presented in a descriptive way only. They do not warrant any product features.

scale drawing JLTL echo output measuring range design operating mode ultrasonic-specific means of measurement transducer frequency blind zone operating range maximum range reproducibility accuracy 65 - 600 mm cylindrical M30 sensor for evaluators echo propagation time measurement electrical data operating voltage Ub 10 - 30 V d.c., reverse polarity protection no-load current consumption < 30 mA type of connection 4-pin M12 initiator plug

output 1 signal output echo PnP: 1 max — 10 mA (signal output echo) recommended transmitted pulse length 80 ps recommended measuring cycle time 12 ms description controlled by open collector (npn), IC > 3 mA, UCE > 30 V input 1 signal input - transmitter material brass sleeve, nickel-plated, plastic parts, PBT ultrasonic transducer polyurethane foam, epoxy resin with glass contents class of protection to EN 60529 operating temperature storage temperature weight further versions stainless steel high chemical resistance cable connection (on request) technical features/characteristics micro/onic...

The content of this document is subject to technical changes. Specifications in this document are presented in a descriptive way only. They do not warrant any product features.

scale drawing JLTL echo output measuring range design operating mode particularities ultrasonic-specific means of measurement transducer frequency blind zone operating range maximum range reproducibility accuracy 65 - 600 mm cylindrical M30 sensor for evaluators high chemical resistance echo propagation time measurement electrical data operating voltage UB 9 - 30 V d.c., reverse polarity protection no-load current consumption < 30 mA type of connection 4-pin M12 initiator plug

output 1 signal output echo pnp: Imax = 10 mA (signal output echo) recommended transmitted pulse length 80 ps recommended measuring cycle time 12 ms description controlled by open collector (npn), Ic > 3 mA, Uce > 30 V input 1 signal input - transmitter ultrasonic transducer operating temperature storage temperature brass sleeve, nickel-plated, plastic parts, PBT polyurethane foam, epoxy resin with glass contents IP 65 high chemical resistance technical features/characteristics controls The content of this document is subject to technical changes. Specifications in this document are presented...