Extract from our online catalogue: ucs ultrasonic sensors Current to: 2025-01-27 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E [email protected] microsonic® is a registered trademark of microsonic GmbH. All rights reserved.

The ucs sensors in a sturdy metal housing are mechanically compatible with the industrial standard of opto sensors. HIGHLIGHTS > Robust metal housing > for harsh usage conditions > Dovetail design > for fast installation > Mechanically compatible with the industry standard > a true alternative to the optical sensor > IO-Link interface > for support of the new industry standard > Automatic synchronisation > for simultaneous operation of up to ten sensors in close quarters > UL Listed to Canadian and US safety standards > 2 Push-Pull switching outputs > pnp or npn basis > Antivalent switching output...

Description The sturdy metal housing of the ucs sensors is mechanically compatible with the industrial standard of optical sensors. The rotatable circular connector allows for flexible selection of the mounting location and facilitates flexible wiring. The ucs sensors are available with 2 Push-Pull switching outputs in pnp- or npn-circuitry with IO-Link interface. By default, switching output F1 works antivalent to switching output F2. Using LinkControl or IO-Link, the antivalence of switching output F1 can be canceled. The Teach-in button on the sensor´s top allows for a convenient setting of...

Single switching point Two-way reflective barrier Window mode The switched output is set by positioning the object to be detected within the desired distance (1) to the sensor, pressing the button for approx. 3 seconds and then pressing it once more for approx. 1 second. Ready. Teach-in of a switching point A two-way reflective barrier can be set up with the help of a permanently mounted reflector by mounting the ucs sensor and the reflector, then pressing the button for approx. 3 seconds and then pressing it once more for approx. 10 seconds. Now, the two-way reflective barrier has been set. Teach-in...

Teach-in of a window with two switching points Up to ten sensors can be synchronised with one another. To do this, all the sensors are electrically connected on pin 5 on the M12 circular connector. If more than 10 sensors must be synchronised, this can be carried out with the SyncBox1 , which is available as an accessory. LinkControl optionally permits the extensive parameterisation of ucs sensors. The LCA-2 LinkControl adapter, which is available as an accessory, can be used to connect ucs sensors to the PC.

Sensor connected to the PC via LCA-2 for programming IO-Link integrated in version 1.1.2 The ucs ultrasonic sensors are equipped with Smart Sensor Profile, which creates more transparency between IO-Link devices.

scale drawing 2 x Push-Pull measuring range design operating mode ultrasonic-specific means of measurement transducer frequency blind zone operating range maximum range resolution reproducibility accuracy proximity switch/reflective mode reflective barrier window mode cuboidal design narrow sound field IO-Link version 1.1 Smart Sensor Profile UL Listed echo propagation time measurement ± 1 % (temperature drift internally compensated) operating voltage UB 10 - 30 V d.c., reverse polarity protection type of connection 5-pin M12 initiator plug

micro/onic ucs ultrasonic sensors

switching output Push-Pull, UB-3 V, -UB+3 V,Imax = 100 mA NOC/NCC adjustable, short-circuit-proof switching output Push-Pull, UB-3 V, -UB+3 V,Imax = 100 mA NOC/NCC adjustable, short-circuit-proof switching hysteresis switching frequency response time delay prior to availability com input synchronisation input teach-in input IO-Link product name format of process data content of process data Bit 0: Q1 switch status; Bit 1-15: distance value with a resolution of 0,1 mm ISDU paramter Identification, measuring configuration, switched output, filter, temperature compensation, operation system commands...

ucs-15/CFF technical features/characteristics temperature compensation Teach-in via push-button LCA-2 with LinkControl IO-Link Duo-LED green/yellow cuboidal design narrow sound field IO-Link version 1.1 Smart Sensor Profile UL Listed The content of this document is subject to technical changes. Specifications in this document are presented in a descriptive way only. They do not warrant any product features.

scale drawing 2 x Push-Pull measuring range design operating mode ultrasonic-specific means of measurement transducer frequency blind zone operating range maximum range resolution reproducibility accuracy proximity switch/reflective mode reflective barrier window mode cuboidal design IO-Link version 1.1 Smart Sensor Profile UL Listed echo propagation time measurement ± 1 % (temperature drift internally compensated) operating voltage UB 10 - 30 V d.c., reverse polarity protection type of connection 5-pin M12 initiator plug

switching output Push-Pull, UB-3 V, -UB+3 V,Imax = 100 mA NOC/NCC adjustable, short-circuit-proof switching output Push-Pull, UB-3 V, -UB+3 V,Imax = 100 mA NOC/NCC adjustable, short-circuit-proof switching hysteresis switching frequency response time delay prior to availability com input synchronisation input teach-in input IO-Link product name format of process data content of process data Bit 0: Q1 switch status; Bit 1-15: distance value with a resolution of 0,1 mm ISDU paramter Identification, measuring configuration, switched output, filter, temperature compensation, operation system commands...

ucs-24/CFF technical features/characteristics temperature compensation Teach-in via push-button LCA-2 with LinkControl IO-Link Duo-LED green/yellow cuboidal design IO-Link version 1.1 Smart Sensor Profile UL Listed The content of this document is subject to technical changes. Specifications in this document are presented in a descriptive way only. They do not warrant any product features.