extract from our online catalogue: pico+ ultrasonic sensors current to: 2026-09-22 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E [email protected] microsonic® ist eine eingetragene Marke der microsonic GmbH. Alle Rechte vorbehalten. Änderungen vorbehalten.

pico+The new M18 ultrasonic sensor: 4 ranges, 3 operating modes, 2 housing's designs, 1 IO-Link interface. Highlights > Variant with 90° angled head > lO-Link interface > for support of the new industry standard > Smart Sensor Profile > more transparency between lO-Link Devices > Automatic synchronisation and multiplex operation > for simultaneous operation of up to ten sensors in close quarters > Improved temperature compensation > adjustment to working conditions within 120 seconds > UL Listed > to Canadian and US safety standards Basics > 1 Push-Pull switching output > pnp or npn basis > 4...

The pico+ ultrasonic sensors are a compact series with M18 threaded sleeves and a housing length of only 41 mm. In addition to the variants with an axial beam direction, there is also a housing variant with a 90° angled head and radial beam direction. With four detection ranges from 20 mm to 1.3 m and three different output stages, this sensor family covers a wide range of applications. Sensors with the Push-Pull output stage support SIO and IO link modes. Sensors with analogue output are optionally available with 4–20 mA current output or 0–10 V voltage output. In SIO mode, sensors are configured...

Teach-in of a switching point Teach-in of a two-way reflective barrier with a fixed reflector > Apply +UB to pin 5 for about 3 seconds > Then apply +UB to pin 5 again for about 10 seconds > Place object at the near edge of the window (1) > Apply +UB to pin 5 for about 3 seconds > Then move the object to the far edge of the window (2) > Then apply +UB to pin 5 again for about 1 second and rising/falling analogue characteristic curve can also be set via pin 5. indicate the state of the output and support microsonic Teach-in. Oil miCrOSOniC pico+ ultrasonic sensors

Teach-in of an analogue characteristic or a window with two switching points Easy to synchronise A number of pico+ sensors can be run closely packed in applications synchronised to stop them from influencing one another. To this end, the sync mode has to be activated and all the sensors are to be electrically connected one to another with pin 5. If more than 10 sensors must be synchronised, this can be carried out with the SyncBox1 , which is available as an accessory. In instances of where a number of sensors are run at an IO-Link master, then the master's function is to assume synchronisation....

The predecessor models pico+xxx/F can be found in the sensor archive. You have special requirements? Nothing as simple as that. With us, you can easily find an individual solution. Let us talk about your application: +49 231 97 51 51-82. pico+ ultrasonic sensors

pico+15/WK/l scale drawing scale drawing 1 x analogue 4-20 mA operating mode analogue distance operating mode analogue distance particularities narrow sound field particularities 90° angular head narrow sound field UL Listed means of measurement echo propagation time transducer frequency blind zone operating range max. range resolution reproducibility accuracy means of measurement echo propagation time transducer frequency blind zone operating range max. range resolution reproducibility accuracy ± 1 % (temperature drift internally compensated) ± 1 % (temperature drift internally compensated)...

Electrical Data operating voltage UB 10 - 30 V d.c., reverse pola rity protection type of connection 5-pin M12 initiator plug output 1 analogue output current: 4-20 mA switchable rising/falling delay prior to availability < 300 ms synchronisation input teach-in input material brass sleeve, nickel-plated, ultrasonic transducer polyurethane foam, epoxy resin with glass contents further versions 90° angular head Technical Features/Characteristics scope for settings Teach-in via com input on indicators 1 x LED green: working, 1 x LED yellow: switch status Electrical Data operating voltage UB 10 -...

micro/onic pico+ ultrasonic sensors

pico+15/WK/U scale drawing scale drawing 1 x analogue 0-10 V operating mode analogue distance operating mode analogue distance particularities narrow sound field particularities 90° angular head narrow sound field UL Listed means of measurement echo propagation time transducer frequency blind zone operating range max. range resolution reproducibility accuracy means of measurement echo propagation time transducer frequency blind zone operating range max. range resolution reproducibility accuracy ± 1 % (temperature drift internally compensated) ± 1 % (temperature drift internally compensated) miCrOSOniC...

Electrical Data Electrical Data operating voltage UB 15 V bis 30 V DC, verpolfest type of connection 5-pin M12 initiator plug output 1 analogue output switchable rising/falling delay prior to availability < 300 ms synchronisation input teach-in input material brass sleeve, nickel-plated, ultrasonic transducer polyurethane foam, epoxy resin with glass contents further versions 90° angular head Technical Features/Characteristics scope for settings Teach-in via com input on indicators 1 x LED green: working, 1 x LED yellow: switch status operating voltage UB 15 V bis 30 V DC, verpolfest type of...

miCfO/OniC pico+ ultrasonic sensors

pico+25/WK/I scale drawing scale drawing design cylindrical M18 operating mode analogue distance means of measurement echo propagation time pending on the analogue window accuracy ± 1 % (temperature drift in ternally compensated) design cylindrical M18 with radially- arranged ultrasonic transducer (90° angular head) operating mode analogue distance particularities 90° angular head means of measurement echo propagation time pending on the analogue window accuracy ± 1 % (temperature drift in ternally compensated)