extract from our online catalogue: nano ultrasonic sensors current to: 2026-10-09 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E [email protected] microsonic® ist eine eingetragene Marke der microsonic GmbH. Alle Rechte vorbehalten. Änderungen vorbehalten.

nano nano - what's in a name? At just 55 mm long, including plug, the nano is the shortest M12 ultrasonic sensor on the market. Highlights Basics > Ultrasonic sensor in the M12 threaded sleeve > The total length including plug is only 55 mm > IO-Link interface > for support of the new industry standard > Smart Sensor Profile > more transparency between IO-Link Devices > Improved temperature compensation > adjustment to working conditions within 45 seconds > UL Listed to Canadian and US safety standards > 1 Push-Pull switching output > pnp or npn basis > 2 detection ranges with a measurement range...

With a housing length of only 55 mm nano sensors with switching outputs are the smallest ultrasonic sensors inside the M12 threaded sleeve on the market. Analogue sensors are 60 mm long. nano has a 4-pole M12 circular plug and are taught via pin 2. The temperature compensation of the sensors profits from a significant improvement. The sensors reach their operating point only 45 seconds after activation of the operating voltage. We now compensate for the influence of self-heating and installation conditions. This brings improved precision shortly after activation of the supply voltage and in running...

nano sensor using alignment assistance > Single switching point > Two-way reflective barrier > Place object (1) to be detected at the desired distance. > Apply +UB to pin 2 for about 3 seconds. > Then apply +UB to pin 2 again for about 1 second. Teach-in of a switching point Teach-in of a two-way reflective barrier with a fixed mounted reflector. > Apply +UB to pin 2 for about 3 seconds. > Then apply +UB to pin 2 again for about 10 second. miCrOSOniC nano ultrasonic sensors

To set a window with two switching points  Place object to the sensor-close window limit (1). Apply +UB to pin 2 for about 3 seconds until both LEDs flash. Then move the object to the sensor-distant window limit (2). Then apply +UB to pin 2 again for about 1 second. Teach-in of an analogue characteristic or a window with two switching points For setting an analogue output  initially position the object to be detected on the sensor-close window limit (1). Apply +UB to pin 2 for about 3 seconds until both LEDs flash. Move the object to the sensor-distant window limit (2). Then apply +UB to pin...

IO-Link integrated in version 1.1.2 for sensors with Push-Pull output. The nano-15/CF and nano-24/CF support the Smart Sensor Profile, which creates more transparency between IO-Link devices. You have special requirements? Nothing as simple as that. With us, you can easily find an individual solution. Let us talk about your application: +49 231 97 51 51-82. nano ultrasonic sensors

nano-15/CU scale drawing scale drawing 1 x analogue 4-20 mA operating mode analogue distance operating mode analogue distance particularities narrow sound field particularities narrow sound field means of measurement echo propagation time means of measurement echo propagation time transducer frequency blind zone operating range max. range reproducibility accuracy transducer frequency blind zone operating range max. range reproducibility accuracy ± 1 % (temperature drift internally compensated) ± 1 % (temperature drift internally compensated) miCrOSOniC nano ultrasonic sensors

operating voltage UB 10 - 30 V d.c., reverse pola rity protection type of connection 4-pin M12 initiator plug output 1 analogue output current: 4-20 mA switchable rising/falling delay prior to availability < 300 ms input 1 Teach-in input operating voltage UB 15 V bis 30 V DC, verpolfest type of connection 4-pin M12 initiator plug output 1 analogue output voltage: 0-10 V (at UB > 15 V), short-circuit-proof switchable rising/falling delay prior to availability < 300 ms input 1 Teach-in input material brass sleeve, nickel-plated, ultrasonic transducer polyurethane foam, epoxy resin with glass contents...

miCrOSOniC nano ultrasonic sensors

operating mode particularities designoperating modeparticularities cylindrical M12 analogue distance measurements narrow sound field UL Listed analogue distance measurements narrow sound field UL Listed means of measurement echo propagation time means of measurement echo propagation time transducer frequency blind zone operating range max. range reproducibility accuracy transducer frequency blind zone operating range max. range reproducibility accuracy ± 1 % (temperature drift internally compensated) ± 1 % (temperature drift internally compensated)

operating voltage UB 10 - 30 V d.c., reverse pola rity protection type of connection 4-pin M12 initiator plug output 1 analogue output current: 4-20 mA switchable rising/falling delay prior to availability < 300 ms input 1 Teach-in input operating voltage UB 15 V bis 30 V DC, verpolfest type of connection 4-pin M12 initiator plug output 1 analogue output voltage: 0-10 V (at UB > 15 V), short-circuit-proof switchable rising/falling delay prior to availability < 300 ms input 1 Teach-in input material brass sleeve, nickel-plated, ultrasonic transducer polyurethane foam, epoxy resin with glass contents...

miCrOSOniC nano ultrasonic sensors

designoperating mode particularities proximity switch/reflective mode reflective barrier window mode narrow sound field IO-Link version 1.1 Smart Sensor Profile UL Listed proximity switch/reflective mode reflective barrier window mode narrow sound field IO-Link version 1.1 Smart Sensor Profile UL Listed Ultrasonic-Specificmeans of measurement transducer frequency blind zone operating range max. range resolution reproducibility accuracy echo propagation time measurement ± 1 % (temperature drift internally compensated) transducer frequency blind zone operating range max. range resolution reproducibility...