extract from our online catalogue: microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E [email protected] microsonic® ist eine eingetragene Marke der microsonic GmbH. Alle Rechte vorbehalten. Änderungen vorbehalten.

> Three-digit digital display > for the display of measured distance values in mm or cm > TeachBox with four-button operation > for programming of the sensor without a PC > LinkCopy function > for copying the sensor settings from one sensor to another without a PC > Uniform microsonic teach-in for all microsonic sensors > to keep easy things easy > Handy adapter > for the programming of ultrasonic sensors > T plug > to insert the adapter between the connector cable and the sensor > LinkControl software > for configuration of sensors from a PC > Backwards-compatible > dso sensors that have been...

The LinkControl adapter LCA-2 is equipped with a USB interface for connection to a PC or laptop. With the LinkControl software, the ultrasonic sensors of the mic+, mic, pico+, lpc+, cube , lcs+, lcs, ucs, pico+TF, crm+, hps+, pms, bks+, bks, dbk+, esp, esf-1 and esf+1 series can be parameterised under Windows®. LinkControl software: input mask LinkControl software: measurement plotter The current measurement values of the ultrasonic sensors can be graphically visualised in the LinkControl software in the form of three different output graphics. The LinkCopy function allows the download of parameters...

LinkCopy: Copying of sensor settings Offline programming within LinkCopy With some sensor series, the sensor settings copied to the LCA-2 can be directly indicated and edited via the digital display before being written back into a sensor. For the LinkCopy function, the LinkControl adapter need not be connected to a PC. The LCA-2 reads the parameters out of the sensor and saves them internally to its EEPROM. The data are thus safely stored in the LinkControl adapter even after supply voltage disconnection and can consequently also be used as a sensor setting archive. Via the integrated TeachBox,...

switched output D1 or the analogue output Press F + T1 to load sensor parameters from LCA-2 to the sensor (upload) Press R (reset) to restart the sensor (for upload, download and measurement value output) Press T2 to teach switched output D2 Press F + T2 to load sensor parameters from the sensor to the LCA-2 (download) © Press F to show measured values indicated in mm/cm on the digital display

Cylindrical Sensors Cubic Sensors Special Sensors Get the current LinkControl software!Version 8.2 This version supplies our new sensors: pms, pico+, pico+TF, cube , lcs+, hps+, dbk+, esp-4, esf-1, esf+1 and bks+. For an update we recommend to delete the existing LinkControl software under Windows beforehand.

LCA-2 Koffer operating mode accessories operating voltage UB 12 - 30 V d.c., reverse pola rity protection type of connection 4-pin M12 initiator plug play (TouchControl) deployable accessory For the convenient setting of a large number of microsonic sensor families. The Link-Control-Adapter LCA-2 can be used to read, copy or write parameters. Additionally, you can connect it with a PC in order to configurate it via LinkControl Software.

operating mode particularities incl. adapter cable and 24V power pack operating voltage UB 12 - 30 V d.c., reverse pola rity protection type of connection 4-pin M12 initiator plug play (TouchControl) deployable accessory Set for convenient setting of a number of microsonic sensor families.<br/>Contents: <br/>LCA-2<br/>- Adaptor for sensors with cable connection (lcs) incl. cable clamps<br/>- Adapter for power supply incl. cable clamps<br/>- Power supply 90-240VAC/24VDC, 625 mA, with 2,5 m cable<br/>- four exchangeable AC-plugs for use in Europe, USA, Great Britain and Australia<br/>-USB - cable...