extract from our online catalogue: cube ultrasonic sensors current to: 2026-10-09 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E [email protected] microsonic® ist eine eingetragene Marke der microsonic GmbH. Alle Rechte vorbehalten. Änderungen vorbehalten.

cubecube ultrasonic sensors - easy installation: no tools required thanks to QuickLock mounting bracket. Highlights > Cubic housing > only 40 mm x 40 mm x 40 mm > Sensor head > mountable in 5 positions > Easily visible LED display > in any mounting position > Convenient QuickLock mounting bracket > IO-Link interface > for support of the new industry standard > Smart Sensor Profiles > more transparency between IO-Link Devices > UL listed > to Canadian and US safety standards Basics > 1 Push-Pull switching output > pnp or npn basis > 1 Push-Pull switching output and 1 analogue output > or switchable...

The cube ultrasonic sensors are designed in a cubic housing for demanding applications. The cube is available with the QuickLock mounting bracket. This allows the sensor to be mounted quickly and easily. The cube can be easily turned in 5 positions thanks to the rotating sensor head. The convenient mounting allows flexible use in numerous applications. Four LEDs show all operating states in any mounting position. The sensor status is therefore clearly visible at all times. cube ultrasonic sensors

There are two output stages available: 1 Push-Pull switching output in pnpor npn-circuitry 1 Push-Pull switching output and 1 analogue output or switchable to 2. switching output With LinkControl or IO-Link, the analogue output can be deactivated and a second Push-Pull switching output activated instead. The second switching output could be used in level monitoring, for example, to control the overflow. With the internal alignment assistance the sensor can be optimally aligned to the object during installation. Using alignment assistance Using the two Teach-in buttons T1 and T2 the cube sensors...

Set cube sensor via Teach-in procedure The cube sensors with switching output have three operating modes:  Single switching point (Method A and B) Two-way reflective barrier Window mode The operating mode single switching point (Method A) is suitable for applications, in which the actual distance to the object is also the switching point. A typical application is level control, where the ultrasonic sensor detects the filling level vertically from above during the filling process. The taught switching point corresponds to the maximum filling level. Teach-in of a switching point Method A and Method...

Teach-in of a single switching point (Method A)  Place object to be detected (1) at the desired distance. Push button T2 for about 3 seconds. Then push button T2 again for about 1 second. Teach-in of a switching point (Method A) Teach-in of a switching point +8% (Method B) Teach-in of a single switching point +8% (Method B)  Place object to be detected (1) at the desired distance. Push button T2 for about 3 seconds. Then push button T2 again for about 3 seconds. Teach-in of a two-way reflective barrier with a fixed mounted reflector  Push button T2 for about 3 seconds. Then push button T2...

For setting the analogue output  Initially position the object to be detected to the sensor-close window limit (1). Push button T1 for about 3 seconds. Then move the object to the sensor-distant window limit (2). Then push button T1 again for about 1 second. Analogue sensors check the connected working resistance at the output and automatically switch to 4–20 mA current output or 0–10 V voltage output. NCC/NOC and rising/falling analogue characteristics can also be set via the buttons. LinkControl permits comprehensive parameterisation of cube ultrasonic sensors via the LinkControlAdapter LCA-2...

You have special requirements? Nothing as simple as that. With us, you can easily find an individual solution. Let us talk about your application: +49 231 97 51 51-82. cube ultrasonic sensors

scale drawing scale drawing detection zone detection zone design cuboidal operating mode lO-Link proximity switch/reflective mode reflective barrier window mode analogue distance measurement particularities small cuboidal design IO-Link version 1.1 Smart Sensor Profile UL listed QuickLock mounting bracket 2nd output switchable design cuboidal operating mode IO-Link proximity switch/reflective mode reflective barrier window mode analogue distance measurement particularities small cuboidal design IO-Link version 1.1 Smart Sensor Profile UL listed QuickLock mounting bracket 2nd output switchable...

Ultrasonic-Specific means of measurement Ultrasonic-Specific echo propagation time echo propagation time measurement transducer frequency transducer frequency blind zone blind zone operating range operating range ternally compensated) Electrical Data operating voltage UB ternally compensated) Electrical Data 9 - 30 V d.c., reverse polarity 9 - 30 V d.c., reverse polarity protection voltage ripple voltage ripple no-load current no-load current consumption type of connection consumption 5-pin M12 initiator plug outputs switching output switching output NOC/NCC adjustable, short- NOC/NCC adjustable,...

ultrasonic transducer polyurethane foam, epoxy resin with glass contents Technical Features/Characteristics scope for settings Teach-in via push-button LCA-2 with LinkControl IO-Link ultrasonic transducer polyurethane foam, epoxy resin with glass contents Technical Features/Characteristics scope for settings Teach-in via push-button LCA-2 with LinkControl IO-Link miCfO/OniC cube ultrasonic sensors

scale drawing scale drawing design cuboidal operating mode lO-Link proximity switch/reflective mode reflective barrier window mode analogue distance measurement particularities small cuboidal design IO-Link version 1.1 Smart Sensor Profile UL listed QuickLock mounting bracket 2nd output switchable design cuboidal operating mode IO-Link proximity switch/reflective mode reflective barrier window mode particularities small cuboidal design IO-Link version 1.1 Smart Sensor Profile UL listed QuickLock mounting bracket means of measurement echo propagation time accuracy ± 1 % (temperature drift in ternally...