Extract from our online catalogue: bks+ ultrasonic web edge sensors Current to: 2025-01-27 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E [email protected] microsonic® is a registered trademark of microsonic GmbH. All rights reserved.

The bks+ edge sensor facilitates the contact-free web edge scanning of foils, paper and other soundimpermeable materials. > 2 housing designs > with 30 and 60 mm fork width > Available in 12 mm or 40 mm measurement range > IO-Link interface > for support of the new industry standard > Smart Sensor Profile > more transparency between IO-Link Devices > Very compact housing dimensions > UL Listed to Canadian and US safety standards > Contact-free detection of the path edge > for regulation of the web path > Analogue output 4-20 mA and 0-10 V > switchable between current and voltage output > 3 LEDs...

Description The bks+ ultrasonic web edge sensor is a fork sensor for scanning the edges of sound-impermeable materials such as foil or paper. This is why the bks+ is ideally suited for the web control of high-transparency foils, light-sensitive materials, materials with greatly varying transparency and paper subject to high paper dust loads. The functional principle Both transducer and receiver are placed in a single, slim fork housing. The transducer in the lower leg is emits short, cyclical sound pulses. These are detected by the ultrasonic receiver in the upper leg of the fork. A material...

With a fork width of only 30 mm and 60 mm respectively and a depth of 33 mm and 73 mm respectively, it has a very compact design. Its working range of 12 mm and 40 mm respectively and its high accuracy of 0.1 mm permit a wide variety of applications. Swichting over between current and voltage outputs is done by using the button or LinkControl. The bks+ is preset and can be used immediately. Optionally, it can also be comprehensively parameterised using LinkControl adapter LCA-2. Updated to IO-Link version 1.1.3 The bks+ sensors with the extension "/A" in the order name now support IO-Link 1.1.3...

detection zone working range designoperating mode particularities > 12 mm (±6 mm) web edge control IO-Link Smart Sensor Profile UL Listed ultrasonic-specific means of measurement transducer frequency blind zone resolution reproducibility pulse operation with amplitude evaluation 170 kHz 5 mm in front of transmitter and receiver 0,01 mm ± 0.1 mm at constant ambient conditions electrical data operating voltage UB 20 - 30 V d.c., reverse polarity protection voltage ripple ± 10 %no-load current consumption < 60 mA type of connection 5-pin M12 initiator plug

output 1 analogue output current: 4-20 mA / voltage: 0-10 V, short-circuit-proof switchable rising/falling output 2 switching output synchronisation input teach-in input lO-Link product name product ID SIO mode support COM mode min. cycle time format of process data content of process data ISDU paramter system commands Smart Sensor Profile IODD version Bit 0-15: degree of coverage with 0.003 mm resolution Teach-in via push-button, linearisation of the output characteristic curve, temperature compensation, standardization of measurement value, analogue output mode, rising/falling output characteristic...

housing fork width fork depth material ultrasonic transducer operating temperature storage temperature further versions zinc die-casting, plastic parts, PBT polyurethane foam, epoxy resin with glass contents IP 65 larger fork width/depth technical features/characteristics scope for settings Teach-in via push-button LCA-2 with LinkControl IO-Link particularities IO-Link Smart Sensor Profile UL Listed The content of this document is subject to technical changes. Specifications in this document are presented in a descriptive way only. They do not warrant any product features. bks+ ultrasonic web...

web edge control IO-Link Smart Sensor Profile UL Listed working range designoperating mode particularities ultrasonic-specific means of measurement transducer frequency blind zone resolution reproducibility pulse operation with amplitude evaluation 310 kHz 5 mm in front of transmitter and receiver 0,01 mm ± 0.1 mm at constant ambient conditions operating voltage UB 20 - 30 V d.c., reverse polarity protection type of connection 5-pin M12 initiator plug

output 1 analogue output current: 4-20 mA / voltage: 0-10 V, short-circuit-proof switchable rising/falling output 2 switching output synchronisation input teach-in input lO-Link product name product ID SIO mode support COM mode min. cycle time format of process data content of process data ISDU paramter system commands Smart Sensor Profile IODD version Bit 0-15: degree of coverage with 0.01 mm resolution Teach-in via push-button, linearisation of the output characteristic curve, temperature compensation, standardization of measurement value, analogue output mode, rising/falling output characteristic...

housing fork width fork depth material ultrasonic transducer operating temperature storage temperature zinc die-casting, plastic parts, PBT polyurethane foam, epoxy resin with glass contents IP 65 technical features/characteristics scope for settings Teach-in via push-button LCA-2 with LinkControl IO-Link particularities IO-Link Smart Sensor Profile UL Listed The content of this document is subject to technical changes. Specifications in this document are presented in a descriptive way only. They do not warrant any product features. bks+ ultrasonic web edge sensors