3D123

3D123

3D123

Product catalog summary
Overview: The document describes the PoE Bridge, a device that facilitates media conversion and powers end devices like access points, web cameras, and IP telephones via RJ-45 ports. It supports long-distance connections using fiber optics and eliminates the need for separate 230 VAC power supplies, reducing installation costs.
Specifications: The Fast Ethernet PoE Bridge supports a maximum output power of 15.4 W (class 0), while the Gigabit Bridge with PoE+ offers up to 30 W. It includes an integrated power supply, is robust, and available in Gigabit and Fast Ethernet versions for multimode and single-mode fiber.
Properties: The device supports media conversion for Gigabit (10/100/1000Base-T) and Fast Ethernet (10/100Base-TX), provides power via PoE (PSE) 802.3af compatible, and offers an optional PoE+ version. It allows automatic or manual configuration and includes a high-class integrated 230 V AC power supply.
Product Overview: The Gigabit Ethernet Bridge with Power-over-Ethernet features a single port, supports triple speed (10/100/1000Base-T), and uses a shielded RJ-45 jack. It is compatible with twisted-pair cables (category 5e) up to 100 m in length.
Power-over-Ethernet: The device acts as Power Sourcing Equipment (PSE) compliant with IEEE 802.3af class 0, with a maximum of 15.4 W. The MS4000080H model supports IEEE802.3at/af up to 30W.
Display and Indicators: The device includes LEDs for power, link, and speed status, indicating power presence, fiber and TP connection status, and TP speed.
Environmental Specifications: Operating temperature ranges from -10 to 60 °C, storage temperature from -20 to 85 °C, and relative humidity from 10 to 90% non-condensing.
Mechanical Specifications: The device dimensions are 158 mm x 133 mm x 40 mm, and it is housed in a black casing.
Standards Compliance: The device complies with CE Mark standards.
Order Information: Various models are available, including the GBE PoE-Bridge and the Bridge GBE PoE+ 30 W, with specific article numbers for ordering.
See more

Catalog excerpts

3D123-1

Product Overview Gigabit Ethernet Bridge with Power-over-Ethernet Description The PoE Bridge enables beside the media conversion the power supply of end devices such as access points, web cameras and IP telephones via RJ-45 port. The wide spread positioning of IP cameras results into the use of fiber optic, because only in this way it is possible to cover these long distances. With the use of Power-over-Ethernet (PoE) the application of 230 VAC power supplies, which have to be installed parallel to the networking cable by using the traditional technology, can be avoided. The networking technician can do the commissioning of the end devices completely because an electrician is not required and that results in further cost savings. Properties Media conversion for Gigabit (10/100/1000Base-T) and Fast Ethernet (10/100Base-TX) Power supply to connected end devices via PoE (PSE) 802.3af compatible, class0 15.4 W Optional version with PoE+ up to 30 W Automatic or manual configuration possible High class and robust device with integrated 230 V AC power supply The Fast Ethernet PoE Bridge supports with the highest class 0 a maximum output power of 15.4 W. Standard compliant devices are detected automatically and are classified accordingly. The Gigabit Bridge is available with the PoE+ class and therefore offers a maximum output power of 30 W. With an integrated power supply the devices are high class and robust. There are Gigabit and Fast Ethernet versions for multimode and single mode fiber available.

 Open the catalog to page 1
3D123-2

Specifications General Type Local Ports (Twisted-Pair) Power-over-Ethernet Gigabit Bridge 1x10/100/1000T 1x1000SX Normal Mode: 2KB, CutThrough Mode: 9KB unmanaged Supports Link Through functionality Display Type green, lit when +5V power is coming up FX LNK/ACT: green, lit when fiber connection is good, blinks when fiber data is present TP LNK/ACT: green, lit when TP connection is good, blinks when TP data is present TP SPD: green when TP speed is 1000Mbps amber when TP speed is 100Mbps off when TP speed is 10Mbps Gigabit Ethernet, triple speed 10/100/1000Base-T Cable Type Twisted-Pair cable,...

 Open the catalog to page 2
3D123-3

Order Information Descriptio n Article Number GBE PoE-Bridge, Multimode 850 nm SC duplex 550 m, int. 230 VAC power supply Bridge GBE PoE+ 30 W,10/100/1000Base-T /1000Base-X , Multimode 850 nm SC duplex 550 m, integrated power supply 230 VAC GBE PoE-Bridge, 1000X-port as SFP slot, int. 230 VAC power supply This docume nt in whole or in pa rt ma y not be duplica te d, re produce d, store d or re tra nsmitte d without prior writte n pe rmission of MICRO S ENS GmbH & Co. KG. All informa tion in this docume nt is provide d ‘a s is’ a nd subje ct to cha nge without notice . MICRO S ENS GmbH & Co. KG...

 Open the catalog to page 3

All MICROSENS GmbH & Co. KG catalogs and technical brochures

  1. MS700482-24B

    2  Pages

  2. Fno

    4  Pages

  3. MICROSENS_FTTO

    16  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.