Catalogs >
MICRONOR >
MR326 Fiber optic incremental encoder

MR326 Fiber optic incremental encoder
3Pages

Catalog excerpts

MR326 Fiber optic incremental encoder - 1

MR326 Fiber Optic Incremental Encoder Size 58mm with Flange Size 90 Faser optischer inkremental Drehgeber Grösse 58mm mit Flansch 90 mm Art.Nr. / PNR / Ordercode 9350.03.678 • • • • • • • • • • Inherently Safe Simple Apparatus Ex op is I/II … Ga 100% Fiber optischer Inkremental Geber / 100% passive sensing design 360 A und B Pulse über 360° / 360 Pulse per Resolution Gehäuse aus Aluminium / Body anodized Aluminium LC Duplex Adaptor/ LC Duplex Receptacle Edelstahl Welle, Durchmesser 12mm / Stainless steel Shaft Size 12mm Schutzgrad IP 66 / Protection IP 66 Temperaturebereich -40°C …. 80°C / Temperaturerange -40°C…..80°C ATEX Klassierung I/II/III Zone 0/1/2/20/21/22 / ATEX Classification I/II/III Zones 0/1/2/20/21/22 Max. Distanz vom Drehgeber bis zum Controller 2500m / Max Distance 2500m Immune gegen jegliche Elektromagnetischen Einfluss / Immune to Lighting or Electromacnetic impact Kein Störrpotential da 100% Passiv / No impact to EMI or RFI Anwendungen / Applications The MICRONOR fiber optical rotary encoder system is used in MRI systems, rail technology, in the oil industry, in mines and Steelproduktion but also in various research laboratories. Das MICRONOR Fiber optische Drehgebersystem wird in MRI-Systemen, in der Bahntechnik, in der Oelindustrie, in Minene und Stahlverarbeiteung aber auch in verschiedenen Forschungslabors eingesetzt. MR326 Fiber optic incremental encoder Electrical Connections: 24 VDC Power A/B Quadrature Output Analog Output RS485 Serial Interface USB Duplex LC Multimode 62.5/125 Fiber Optic Cabling max. 2500m Technische Änderungen vorbehalten / Subject to change without prior notice 8105 Regensdorf ++41 044 843 40 20 ++41 044 843 40 39 http://www.micronor.ch Newbury Park,CA USA +1-805-499-0114 +1-805-499-6585 http://www.micronor.com

Open the catalog to page 1

MR326 Fiber optic incremental encoder - 2

Fiber Optic Incremental Encoder Size 58mm with Flange Size 90 Faser optischer inkremental Drehgeber Grosse 58mm mit Flansch 90 mm Spezifikation / Specifications Measurement Parameters Resolution 360ppr (Consult Micronor for special requirements) Max Speed 8,000 RPM continuous (using MR320 quadrature outputs only) 5,000 RPM (using MR320 Quadrature and some Auxiliary Functions) Note: There is a tradeoff between operating speed and use of MR320 auxiliary functions (analog outputs, divider, multiplier, etc.). Contact Micronor to discuss your requirements. Mechanical Parameters Starting Torque...

Open the catalog to page 2

MR326 Fiber optic incremental encoder - 3

MR326 Fiber Optic Incremental Encoder Size 58mm with Flange Size 90 Faser optischer inkremental Drehgeber Grösse 58mm mit Flansch 90 mm Art.Nr. / PNR / Ordercode Zeichung / Drawing Zu beachten bei der Installation von optischen Kabel / Note during the installation of the optical cable General information how to handle fibre optic cables Handle fibre optic cables generally with exceeding care Never load fibre optic cables with overexposed tension Don't use any cable straps Don't pull fibre optic cables across corners Make some release loops and never go below radius 80mm Keep connectors...

Open the catalog to page 3