MR320 Controller for all fiber optic incremental encoder
10Pages

MR320 Controller Modul for fiber optical incremental Encoder Auswertmodul für den faser optischen inkremental Drehgeber Art.Nr. / PNR / Ordercode Auswertgerät für alle Fiber optischen Drehgeber/ Controller module for all Fiber optic incremental Encoder DIN Montage / Mounting on 35mm DIN Rail Gehäuse aus Aluminium / Body anodized Aluminium Speisespannung +15VDC ….32VDC / Operates from 15VDC to 32VDC Schnittstelle A/B Quadrature, Analoge 4-20mA, +-10V / Interface A/B quadrature, line driver and Push Pull and 4-20mA and +-10V USB Schnittstelle mit Modbus RTU oder RS422/485 Seriel / USB,Modbus RTU or RS422/RS485 serial interface Temperaturebereich -5°C …. 55°C / Temperature -5°C…..55°C Schutzgrad IP 40 / Protection IP 40 Stecker LC Duplex / optical Connector LC Duplex Anwendungen / Applications The MR320 Controller module is the active half of the MR320 series Fiber Optic Incremental Encoder System. The module incorporates multiple built-in interfaces for compatibility with PLCs, motor drives and other motion control systems. The MICRONOR fiber optical rotary encoder system is used in MRI systems, rail technology, in the oil industry, in mines and Steelproduktion but also in various research laboratories. Das MR320 Auswertgerät ist der aktive Teil vom MICRONOR Fiber optischen incremental Drehgebersystem. Das Modul wandelt die optischen Signale vom Drehgeber in die bekannten elektrischen Signale wie A/B TTL, 4-20mA oder +-10V. Das MICRONOR Fiber optische Drehgebersystem wird in MRI-Systemen, in der Bahntechnik, in der Oelindustrie, in Minene und Stahlverarbeiteung aber auch in verschiedenen Forschungslabors eingesetzt. Spezifikation / Specifications Functional and Electrical Interface DIRECT Quadrature Outputs Bandwidth Format POSITION COUNTER Range DIVIDER Quadrature Outputs Analog Outputs Current Output: Voltage Output: RS422/485 Interface RS232 Interface Modbus interface USB interface Electrical Connections 70kHz max. (Contact Micronor concerning modifications for higher bandwidth applications.) A/B Push-Pull and A/A’/B/B’ RS422 Line Driver Direction/Sign Bit plus 24-bit counter value (±8,388,607, equivalent to 8,192 revolutions with MR324 1024ppr encoder). Both software and hardware Zero (calibration) Set available. DIVIDER range is 2-128. A/A’/B/B’ Line Driver (A/B Push-Pull available as option,) Each output is individually programmable for POSITION (full-scale range of 1-8,388,607 counts) or SPEED (full-scale range of 10-10,000 RPM) Range: 0mA to 24mA, Max Burden Resistance: 500Ω (24V supply) Range: ±12V; Max Current: 5mA (2kΩ load); Short Circuit < 5 seconds Direct connection via J3, also Modbus (RTU) compatible) With optional MR232-1 Converter Cable Modbus (RTU) compatible RS422/RS485 interface USB, disables RS485/Modbus interface when used J1, J2 J3 connections via WAGO QuickConnect Plugs (supplied with MR320) Fiber Optic Interface Connector Type Duplex LC plug with Super PC Polish Performance Requirements: IL<0.5dB, RL>24dB, Telecordia GR-326 Endface Geometry 2 x Multimode 62.5/125, Graded Index, 0.275NA Fiber Type Maximum Optical Link Length Maximum of 2500 meters (8300 ft) or 2-way optical loss of 12.5dB at 850nm (Contact Micronor for longer distance requirements) Power Supply Power Supply Input +5V Output +15VDC to +32VDC, 60mA (During Power Up, power supply should be capable of delivering a momentary current in excess of 100mA.) 10mA maximum load. (Designed for powering MR232-1 RS485/RS232 adapter cable) Technische Änderungen vorbehalten / Subject to change without prior notice 8105 Regensdorf ++41 044 843 40 20 ++41 044 843 40 39 http://www.micronor.ch Newbury Park,CA USA +1-805-499-0114 +1-805-499-6585 http://www.micronor.com

Controller Modul for fiber optical incremental Encoder Auswertmodul fur den faser optischen inkremental Drehgeber Environmental Performance Seal Rating ATEX Rating Physical Attributes Housing Dimensions Specifications Subject To Change Without Notice Aufbau des System / Features passivund kann nicht elektro- magnetisch storen. ■ Der Sensor ist immun gegen EMI, RFI, ■ Sensor ist ATEX als "Einfache Apparat" Einsatz in alien Arten von explosions- gefahrdeten Raumen explosionsfahige einschlieSlich Minen und Bohrinseln. ■ Mehrere integrierte Schnittstellen All optical, passive sensor does not...

MR320 Controller Modul for fiber optical incremental Encoder Auswertmodul für den faser optischen inkremental Drehgeber Art.Nr. / PNR / Ordercode Zu beachten bei der Installation von optischen Kabel / Note during the installation of the optical cable Verify that the optical link loss is within system’s two-way loss margin of 12.5dB ― Account for losses of inline connectors, splices and cable ― For example, 4 interconnections (0.5dB each) over 400-meter (3dB/km) = 6.4dB Follow industry-specific FOLAN component selection and installation guidelines ― Always follow bend radius, flex, clamping...

Controller Modul for fiber optical incremental Encoder Auswertmodul fur den faser optischen inkremental Drehgeber werden. Der PC wird an das Modul MR320 iiber USB oder RS232 COM-Schnittstelle (mit optional MR232-1 RS485-RS232 Konverterkabel) angeschlossen. Typische ZAPPY ™-Funktionen sind nachfolgend aufgefuhrt: ■' ZAPPY - Encoder Parameter Programming VER2.0 [ © 2004, 2005 by MICRONOR ] Fiber Optic Encoder System Online Instructions Technische Anderungen vorbehalten / Subject to change without prior notice MICRONOR INC Newbury Park.CA USA® +1-805-499-0114 § +1-805-499-6585 B...

Controller Modul for fiber optical incremental Encoder Auswertmodul fur den faser optischen inkremental Drehgeber Massbild & Elektrische Anschliisse/ Outline drawing and electrical connection DUPLEX LC FIBER OPTIC CONNECTOR PORT. ALWAYS KEEP COVERED OPTICAL ENCODER Technische Anderungen vorbehalten / Subject to change without prior notice MICRONOR INC Newbury Park.CA USA® +1-805-499-0114 § +1-805-499-6585 B http://www.micronor.com flD sales@micronor.com