Catalogs >
MICRONOR >
Inclination Sensor 1D with CANopen & switching outputs Typ: MR 406

Inclination Sensor 1D with CANopen & switching outputs Typ: MR 406
2Pages

Catalog excerpts

Inclination Sensor 1D with CANopen & switching outputs Typ: MR 406 - 1

Serie MR406 Е 1-dimensional 360-inclination sensor Е High resolution and accuracy Four freely configurable, potential-free switching outputs (type MR406.2 only) Օ Comfortable CAN Bus interface Baud rates from 10 kBit/s to 1 MBit/s Robust, simply mountable aluminium housing Օ Suitable for industrial use: Temperature range: -40հC to +80C Degree of protection: IP65/67 High sampling rate and bandwidth Е Applications: Industry automation Agricultural and forestry machines Utility vehicles Crane and hoisting technology Programmable vibration suppression Օ Functions: aTPDO (RTR, cycle, event-controlled, synchronised) SYNC Consumer (synchronised transmission of the TPOD after receiving a SYNC message) EMCY Producer (exceeding of a limit value, temperature monitoring in the device) Failure monitoring via heartbeat or nodeguarding / lifeguarding Freely configurable limit frequency (digital filter) Technical data General Parameters Measurement axes 1 Measurement range 360 (no limit stop) Resolution 0,01а Calibration accur. (at 25C) б0,1 Nonlinearity max. б0,2 Temperature coefficient typ. б0.008 /K Cross sensitivity error at б45 cross slope max. б1.5 Cut-off frequency typ. 20 Hz, 2 > nd order (without digital filter)/0.3 Ѕ 25 Hz, 8 > th ord. (with digital filter) Operating temperature -40C to +80аC Characteristics Interface CANopen Data rates 10k, 20k, 50k, 62.5k, 100k, 125k, 250k, 500k, 800k Bit/s, 1 MBit/s Functions TPDO (RTR, cycle, event controlled, synchronised), setting of parameters by SDO and object dictionary, digital filter (butterworth lowpass, 8 > th order), SYNC consumer, EMCY producer, output and surveillance of the device's internal temperature (2.0 K accuracy), Failure monitoring via heartbeat or nodeguarding / lifeguarding four switching outputs (MR406.2 only) PhotoMOS relais, synchronically switching, freely configurable > www.micronor.ch size="-1">

Open the catalog to page 1

Inclination Sensor 1D with CANopen & switching outputs Typ: MR 406 - 2

Serie MR406 Electrical Parameters Supply voltage 10 V DC to 30 V DC Current consumption (MR406.1 / MR406.2) 105 mA to 40 mA / 150 mA to 60 mA Capacity of the switching outputs (MR406.2) 0,5 A, max. 30 V DC, short-circuit-proof Mechanical Parameters Connector CAN sensor connector 5-pole (M12) Connector switching outputs (MR406.2) sensor connector 8-pole (M12) Degree of protection IP65/67 Shock survival max. 3.500g Dimensions / Mass 58mm x 90mm x 31mm / about 160g Order key > www.micronor.ch size="-1">

Open the catalog to page 2