Catalogs >
MICRONOR >
Inclination Sensor 1D with CAN & switching outputs Typ: MR 405

Inclination Sensor 1D with CAN & switching outputs Typ: MR 405
2Pages

Catalog excerpts

Inclination Sensor 1D with CAN & switching outputs Typ: MR 405 - 1

Order key Inclination sensor Type MR405 Measurement axes 1 Measurement range 360 (no limit stop) Resolution 0,01а Calibration accuracy (at 25C) б 0.1 Nonlinearity max. б 0.2 Temperature coefficient typ. б 0.008 / K > nd order (without digital filter) / 0,3 ... 25 Hz, 8. Critical frequency typ. 20 Hz, 2. > th order (with digital filter) Sampling rate 100 s > -1 Interface CAN 2.0 A and B (11 and 29 Bit ID) according to ISO 11898-2 Data rates 10k, 20k, 50k, 62,5k, 100k, 125k, 250k, 500k, 800k Bit/s, 1 MBit/s Functions Angle request, cyclical output, setting of parameters, digital filter (butterworth lowpass, 8th order), output of the deviceВs internal temperature (2.0 K accuracy), configuration via CAN Four switching outputs PhotoMOS relais, synchronically switching, freely configurable > Supply voltage 10 to 30V DC Current consumption 105mA to 40mA / 150mA to 60mA Capacity of the switching outputs 0.5mA, max. 30V DC, short-circuit-proof > Connector CAN sensor connector 5-pole (M12) Connector switching outputs sensor connector 8-pole (M12) Degree of protection IP65/67 Shock survival max. 3.500g Dimensions 58mm x 90mm x 31mm Mass ca. 160g > www.micronor.ch size="-1">

Open the catalog to page 1

Inclination Sensor 1D with CAN & switching outputs Typ: MR 405 - 2

Connector assembly - allocation (CAN-Bus- Connector): 1 = Shield 2 = Supply voltage (+24V) 3 = GND (Data supply potential) 4 = CAN _H 5 = CAN _L Connector assembly - allocation (Switching output- Connector): 1 = Switching output 0 Allocation +U 2 = Switching output 0 Allocation -U 3 = Switching output g 1 Allocation +U 4 = Switching output 1 Allocation +-U 5 = Switching output 2 Allocation +U 6 = Switching output 2 Allocation -U 7 = Switching output 3 Allocation +U 8 = Switching output 3 Allocation -U > www.micronor.ch size="-1">

Open the catalog to page 2