Catalog excerpts
Fan- & Blower Technology Personal Protection Components U71HX-024KX-6 High pressure radial blower O2 resistant parts No Manufacturer part number Structure: Radial Blowers Dimension 71 mm Motor concept Various Nom. Voltage VDC Ball Bearing Housing Material: plastic housing Standard type O2 Electronic commutated Motor (brushless), dia 22mm (50W) Neodym - Ferrit Magnet / ALU spray coated Winding insulation O2 resistant 2 Ball bearing/stainless steel / Grease Diester-Oel / Lithium Motor/Support, Anaerobe, Loctite 603 Mat. Polyamid (PA6) UL94 VW1 / biocompatible Impeller/Shaft fixation, Anaerobe, Loctite 603 Motor support Mat. Aluminium (ALU) without anodization Mat. Polycarbonate LEXAN HPS1 and HPS2 (PC) / biocompatible Suitable for EtO, steam and gama sterilisation / FDA approved USP Class 6 PC Parts/Motor support, Cyanacrylate Loctite 4601 Lead wire Connector Contact crimp MOLEX 43025-0800 Mat. PA 6.6 / UL94V-2 MOLEX 43030-0001 Mat. CU/ZN Label Distribution: made: Single leads, Length min. 300mm (Insulation Silicone) type UL3132 / AWG 24 e-mail info@micronel.ch
Open the catalog to page 1Fan- & Blower Technology Personal Protection Components Standards Operating range Nominal voltage U [V] Voltage range U [V] Current I [mA] Power P [W] Speed n [min-1] Air flow Q [l/min] At 24 VDC Typ. Working point Appr. 50% Q max. Current I [mA] Power P [W] Speed n [min-1] Air flow Q [l/min] Pressure p [Pa] Current I [mA] Power P [W] Speed n [min-1] Pressure p [Pa] without external cooling a minimum Flow of 50 l/min. is necessary See p/Q diagram Mechanics Running time Temperature range operating and stock Distribution: made: e-mail info@mic
Open the catalog to page 2Fan- & Blower Technology Personal Protection Components Dimensional drawing Electric circuit Distribution: made: e-mail info@micronel.ch
Open the catalog to page 3Fan- & Blower Technology Personal Protection Components Current I nominal: XXX mA Pressure nominal: XXXX Pa Unbalanced max.: G XX subjective noise estimation Distribution: made: Final Inspection Revision Additional Documents Test with orifice 4.34 at 24VDC and speed 28’000 rpm +/-1% Motor controller: Maxon DEC 50/5 Dimensional Drawing P/Q Diagram Final Inspection (air density at MAG max. 1.14kg/m3) Spec. created e-mail info@micronel.ch
Open the catalog to page 4All Micronel catalogs and technical brochures
-
Specification U65MN-024KS-6
5 Pages
-
Specification U51DL-024KK-5
5 Pages
-
Specification U51DL-024KK-4
7 Pages
-
Specification U51DL-024KK-4
7 Pages
-
Specification U51D2-024KX-6
5 Pages
-
Specification U65HN-024KS-6
5 Pages
-
Specification U65MN-024KS-5
5 Pages
-
Specification U65MN-024KS-6
5 Pages
-
Specification U65ML-012KS-5
5 Pages
-
Specification U65ML-024KT-5
5 Pages
-
Specification U85MX-024KX-4
6 Pages
-
Specification U85MX-024KX-5
5 Pages
-
Specification U85MX-024KE-5
5 Pages
-
Specification U100H4-024KA-4
6 Pages
-
Specification U100HL-024KA-4
7 Pages
-
Specification D601P-024KM-4
7 Pages
-
Specification D481P-024KM-4
7 Pages
-
Specification D341P-024KM-4
6 Pages
-
Specification D301P-006KH-4
6 Pages
-
Specification D241P-006KH-4
6 Pages
-
U85HL-024KH-4
7 Pages
-
U71MX-024KX-4
6 Pages
-
U71HL-024KM-4
7 Pages
-
U65H4-024KX-6
5 Pages
-
U65H2-024KX-6
5 Pages
-
U51HP-024KM-43
7 Pages
-
U51HP-012KM-43
7 Pages
-
U51DL-012KK-4
7 Pages
-
U51DX-024KK-5
5 Pages
-
U51DX-012KK-5
5 Pages
-
U51DL-012KK-4
7 Pages
-
U51DL-012KK-5
5 Pages