Specification U100H4-024KA-4
6Pages

Specification Radial Blower U100H4-024KA-4 General Information Item Product type Radial blower with integrated electronic motor driver Standard product Description This ruggedized and IP67 proof, versatile 24 VDC blower offers standardized scew tubing connection for pressure and vacuum applications in super harsh, industrial environments. The integrated brushless driver provides set-speed input and tacho output. For the M16 cable connector we offer different mating cable harnesses. Features • Static Pressure: 180 hPa, freeflow: 860 l/min • 24 VDC brushless DC-motor • Solid full aluminum housing • For harsh industrial environments • Ingress protection (EN60529) IP67 • Speed control and tacho frequency output • G3/4 inch thread at inlet and outlet General Conditions Unless otherwise stated all data are measured at nominal voltage and are valid at 20 °C ambient temperature and 1.2 kg/m3 standard air density. Values listed are nominal and can vary depending on the installation conditions and due to component tolerances. Test setup according to ISO 5801 with standardized inlet and outlet chambers. Tolerances based on specified speed data according to ISO 13348, grade 4: pressure +/-10 %, power +16 %. Tolerances based on constant voltage: speed +/-10 %, pressure +/-21 %, power +33 %. For continuous blower operation please refer to specified maximum ratings. Performance data outside normal operating range plotted for informa

Performance Pressure Operation at Outlet Flow rate [cfm] Speed [krpm] Flow rate [l/min] Flow rate [l/min] Vacuum Operation at Inlet Speed [krpm] Flow rate [l/min] Shut-Off in Pressure Operation (Zero Flow Rate) Static pressure Power consumption Static pressure Power consumption Flow rate Power consumption Shut-Off in Vacuum Operation (Zero Flow Rate) Free-Air (Zero Static Pressure)

Technical Data Electrical Nominal voltage Voltage range Minimum power supply current(1) Maximum start-up time Maximum ripple voltage Minimum flow rate Maximum speed Maximum acceleration Maximum power consumption Maximum housing surface temperature Ambient temperature (operating) Ambient temperature (storage) Relative humidity (noncondensing) Maximum Ratings for Continuous Operation Ingress protection (EN60529) Maximum oxygen concentration Motor Type Brushless direct current motor Winding insulation class Acoustics Sound pressure level(3) Leak Tightness Maximum leak flow rate Mechanical...

Inlet G3/4“ Depth of thread 16 mm max. 10 Nm Outlet G3/4“ Depth of thread 16 mm max. 10 Nm Mounting holes Orientations Direction of rotation Mounting position Counter-clockwise (view on inlet) Any direction Materials Components Stainless steel Motor housing Body: Nickel plated brass Pin contacts: Brass, gold plated Protection class: IP67 Crimp terminal Lead wire

Identification Label Design Identification number • Year, calendar week (YYWW) • Fabrication number (6 digits) • Serial number (3 digits) Micronel Radial Blower Part number Tachometer output Electronic Functions Integrated Electronic Motor Driver Type Micronel brushless direct current motor driver • Integrated speed control (voltage / resistor) • Tachometer frequency signal • Locked rotor protection Speed Control Input The blower speed can be controlled either by input voltage or input resistor value. See „Set Speed Input“ tables for further Input Voltage Input Resistor Tachometer Output...

Electronic Functions Set Speed Input Voltage [VDC] Operation Mode Not defined, blower might run or stop Minimum start-up voltage Blower speed depends on input voltage Set Speed Input Resistor [kΩ] Operation Mode Not defined, blower might run or stop Minimum start-up resistance Blower speed depends on resistor value Accessories Not included! Micronel Cable U100X-M16 6-Pol Micronel Radial Blower U100UL-024KA-4 Micronel Radial Blower U100UL-024KA-4 Please see separate accessories list or contact Micronel Sales for a full list of options and accessories. All data are subject to change without...