Specification D601P-024KM-4
7Pages

General Information Item Product type Tube fan with integrated electronic motor driver D601P-024KM-4 D603P-024KM-4 with flange at outlet (option) D604P-024KM-4 with flange at inlet (option) Standard product Description In contrast to the Flat Fans, the Micronel Tube Fans offer increased pressure performance while still maintaining a high volume flow. They all feature extremely quiet and efficient operation while offering extreme reliability and life expectancy. Features • Static pressure 8.2 hPa, freeflow 1 910 l/min • 24 VDC brushless DC-motor • Speed control and tacho frequency signal • Small dimensions through slim design • Options for mounting flange with holes General Conditions Unless otherwise stated all data are measured at nominal voltage and are valid at 20 °C ambient temperature and 1.2 kg/m3 standard air density. Values listed are nominal and can vary depending on the installation conditions and due to component tolerances. Test setup according to ISO 5801 with standardized inlet and outlet chambers. Tolerances based on specified speed data according to ISO 13348, grade 4: pressure +/-10 %, power +16 %. Tolerances based on constant voltage: speed +/-10 %, pressure +/-21 %, power +33 %. For continuous blower operation please refer to specified maximum ratings. Performance data outside normal operating range plotted for information

Performance Pressure vs. Flow Characteristics Flow rate [cfm] 14.1 Flow rate [l/min] Speed and Power vs. Flow Characteristics Flow rate [cfm] 14.1 Speed [krpm] Flow rate [l/min] Shut-Off in Pressure Operation (Zero Flow Rate) Static pressure Power consumption Flow rate Power consumption Free-Air (Zero Static Pressure)

Technical Data Electrical Nominal supply voltage Supply voltage range Minimum power supply current(1) Maximum start-up time Maximum ripple voltage Minimum flow rate Maximum speed Maximum acceleration Maximum power consumption Maximum housing surface temperature Ambient temperature (operating) Ambient temperature (storage) Relative humidity (non-condensing) Maximum Ratings for Continuous Operation Ingress protection (EN60529) Maximum oxygen concentration(2) Motor Type Brushless direct current motor Winding insulation class Acoustics Sound pressure level(4) Leak Tightness Maximum leak flow...

Orientations Direction of rotation Mounting position Clockwise (view on inlet) Any direction Materials Components Aluminum anodized black Motor housing Crimp terminal Lead wire Silicone insulated cable Flammability: UL 3239

Identification Label Design Part number Identification number: • Year, calendar week (YYWW) • Fabrication number (6 digits) • Serial number (3 digits) Nominal voltage Tachometer output Electronic Functions Integrated Electronic Motor Driver Type Sensored brushless direct current motor driver • Integrated speed control (PWM / voltage) • Tachometer frequency signal • Locked rotor protection • Over current protection Speed Control Input Input Voltage The fan speed can be controlled by either input voltage or PWM. See „Set Speed Input“ table for further details. Tachometer Output Tachometer...

Electronic Functions Set Speed Input Voltage [VDC] Operation Mode Not defined, fan might run or stop Minimum start-up voltage Fan speed depending on input voltage Operation Mode Not defined, fan might run or stop Minimum start-up Fan speed depending on duty cycle Options for Mounting Product no. with option Flange Inlet Flange Outlet Micronel Tube Fan D601P-024KM-4 Micronel Tube Fan D603P-024KM-4* Micronel Tube Fan D604P-024KM-4* * The drawings show versions of flange.

Notice Please see separate accessories list or contact Micronel Sales for a full list of options and accessories. All data are subject to change without advanced notice. © 2024 by Micronel AG. All rights reserved. Micronel AG Zürcherstrasse 51 CH - 8317 Tagelswangen Handle in power-off conditions only! No application of forces on inlet and outlet ports! Read operating manual!