Temperature compensation gage, os4100
2Pages

oooo oooooo Temperature Compensation Sensor | os41c(SgBc • Continuous lifetime health monitoring of bridges, dams, buildings, tunnels, ships, aircraft, trains, and other complex • Measurement of relative temperature for compensation of strain measure- • Fast response time • Qualified to same rigorous standards used for comparable electronic gages • Cable integrated with sensor package for fiber protection and strain relief. • Rugged, permanent weldable package • Fast, simple, repeatable installation • Designed specifically for temperature strain gages • Connections for weld, epoxy, or screw • Double ended design supports multi- plexing of many sensors on one fiber. • Micron Optics' patented micro opto- mechanical technology. • Included in ENLIGHT's sensor tem- plates - allows for quick and easy optica The os4100 is specifically designed to provide temperature compensation data for strain measurements from FBG based strain gages installed on the same structure. Because its installation procedure is similar is to the os3100 Optical Strain Gage, it is a convenient choice for compensation of the os3100. It is also compatible with the os3200 Optica Strain Gage. The os4100 Temperature Compensation Sensor is designed to make fiber handling easy and sensor installation fast and repeatable. It is based on fiber Bragg The os4100's stainless steel carrier holds the FBG in tension and protects the fiber during installation. Since there are no epoxies holding the fiber to the carrier, long term stability is ensured by design. The universal attachment feature on the os4100 carrier design allows fastening by weld, epoxy or screw. This sensor can be used alone or in series as a part of an FBG sensor array. Installation and cabling for such arrays is much less expensive and cumbersome than comparable electronic gage networks. The os4100 Temperature Compensation Gage is qualified for use in harsh environments and delivers the many advantages inherent to all FBG based With each sensor, Micron Optics provides a Sensor Information Sheet listing the gage factor and calibration coefficients needed to convert wavelength information into engineering units. Micron Optics' ENLIGHTSensing Software provides a utility to calculate and then record, display, and transmit data for large networks of sensors. Installation, qualification and other sensor information is available at: http://www.micronoptics.com/ TUNED Products displaying the " Micron OpticsTuned" logo include Micron Optics tunable technologies ensuring high quality and performance.

ooooo ooooo Temperature Compensation Sensor | os4100 1. Denotes Beta product. For more details see www.micronoptics.com/product_designation.php. 2. Three thermal cycles from min to max temperature. 3. Typical: 50°C and 85% Relative Humidity. Extreme conditions: ±1.3°C (±36pm); 1,000 hour soak 75°C and 75% Relative Humidity. 4. See http://www.micronoptics.com/support_downloads/Sensors/for installation details. Ordering Information os4100-wwww-1xx-1yy (Example: os4100 -1563-1FC-1UT) wwww: Wavelength (±1 nm) 1xx: Cable 1, Length & Connector 1yy: Cable 2, Length & Connector Standard: 1516 to...