Catalog excerpts
Particle Size Analysis Electrolyte Preparation System The Elzone II, and similiar instruments use software routines to subtract or nullify the effects of unwanted particles. The use of these routines requires additional time to measure background levels and assumes that contaminant concentration is the same during background and sample analysis, which may have taken place on different days. The ElectroPrep 053 removes these particles. Electrical sensing zone particle sizing instruments employ electrolyte as a dispersion medium. Preparation of this electrolyte for analysis is a crucial step in obtaining valid data. Following the same preparation protocol with every sample analysis is a necessity for ensuring repeatability and reproducibility. For highly accurate particle size analysis, electrolytes must be virtually free of particles. This is defined as a contamination concentration that is below 0.5% of the total number of particles analyzed. The new ElectroPrep™ produces a constant supply of filtered electrolyte for the Elzone II 5390 and other instruments. In typical usage, one preparation of electrolyte may last up to several months. Usually the dispersion electrolyte contains undesirable levels of particles. During analysis, these particles degrade accuracy. The more sensitive the analyzer, the more pronounced these effects could be. When using highly sensitive instruments such as the Micromeritics Elzone II 5390, the removal of unwanted particles is extremely desirable for obtaining the most accurate particle size data possible. Micromeritics Instrument Corporation One Micromeritics Drive, Norcross, GA 30093-1877, USA US Sales: 770.662.3636, International Sales: 770.662.3660 Customer Orders: 770.662.3636, FAX: 770.662.3696 www.micromeritics.com
Open the catalog to page 1Un-Filtered Electrolyte Particle Size in Micrometers The Micromeritics ElectroPrep is a highly effective system for the preparation of contaminant-free electrolyte for use with the Elzone II and other instruments. For electrolytes in which sample particles readily disperse (e.g. alumina in saline water) without having to employ an additional dispersing agent, the waste liquid can simply be poured back into the container and used again and again. In typical usage under this circumstance, one preparation of electrolyte may last several months before the filter cartridge must be replaced. This...
Open the catalog to page 2All Micromeritics Instrument Corp. catalogs and technical brochures
-
Elzone® II 5390
8 Pages
-
ChemiSorb HTP
2 Pages
-
ChemiSorb™ Series
8 Pages
-
ASAP™ 2050
8 Pages
-
ACCUPYC II 1345
16 Pages
-
The Model 021 LN2
2 Pages
-
MicroActive
2 Pages
-
AutoPore™ IV Series
6 Pages
-
Saturn DigiSizer II
6 Pages
-
Elzone® II 5390
8 Pages
-
3Flex
9 Pages
-
AutoChem II 2920
5 Pages
-
ASAP 2460
5 Pages
-
TriStar II PLUS
6 Pages
-
ASAP 2420
5 Pages
-
GeoPyc® 1365
4 Pages
-
DVVA II
2 Pages
-
FlowSorb III 2305 / 2310
2 Pages
-
Gemini® VII 2390
8 Pages
-
ASAP 2020 Plus
6 Pages
-
AutoPore V
8 Pages
-
Smart VacPrep
2 Pages
-
SediGraph III PLUS
6 Pages
-
Chemisorption Series
8 Pages
-
AutoChem 2950 HP
8 Pages
-
Micromeritics Products Brochure
11 Pages