IAC RECOVIB® ROBUST ACCELEROMETERS

The RECOVIB® accelerometers bridge the gap between the performance of laboratory accelerometers (which are often expensive, fragile and offer low protection) and the robustness of industrial accelerometers (which are sometimes cheaper but often noisy and inaccurate). Our accelerometers can be deployed in industrial environments for monitoring machinery or structures. The RECOVIB® accelerometers are of proven design and most of the models available are widely used in a variety of fields, such as the machine tools, precision machining and onshore and offshore wind energy sectors in monitoring or...

ADVANTAGES INTERNAL SIGNAL CONDITIONING The signals from the vibration sensor are amplified and conditioned by the accelerometer unit itself before being passed to the data acquisition system through a disturbed industrial medium. Our accelerometers are equipped either with a voltage output or a 4-20 mA current output. GALVANIC ISOLATION The RECOVIB® accelerometers offer galvanic isolation of the signal conductors. An additional isolation module is therefore not needed. Multiple sensors can be distributed in multiple locations and connected to the same acquisition system without signal degradation,...

All accelerometers can be made in IP68 (up to 5 BAR with marine cable) (1) : Resolution for other bandwidth can be computed using Resolution (^g) = Noise (^g/VHz) x Vbandwidth(Hz) (2) : Exist in flat casing (4) : Other range upon request_