IAC-UHRS-Ud-02

IAC-UHRS-Ud-02

IAC-UHRS-Ud-02

Product catalog summary
Properties
  • 2-axes measurement capability
  • Background noise as low as 1µg/√Hz
  • Amplified ±2.7V differential output
  • Embedded signal conditioning
  • Compact and rugged design
  • IP67 ingress protection grade
Specifications
  • Stainless Steel Casing AISI316 Grade for offshore/marine environments
  • Aluminium casing with MIL-A-8625 Type II coating
Performance by Model
Range (g)Sensitivity (mV/g)Frequency Response (-3dB) (Hz)Noise (µg/√Hz)
± 39000 - 5001.0
± 55400 - 6501.5
Electrical Connections
  • Cable Gland Model: Various signal and supply connections with color-coded wires
  • M12 Connector Model: Includes sensor supply and voltage differential output connections
Output/Channel
  • Output Range: ± 2.7V
  • Supply Voltage: 10-30 VDC
  • Lower frequency limit: 0 Hz (DC)
  • Non-linearity: ± 0.5 % typical, 1.5% max
  • Sensitivity Error: 2%
  • Transverse Sensitivity: 2 % typical, 3 % max
  • Offset: ± 20 mg
  • Destruction limit: 1000g
Environmental Characteristics
  • Operating Temperature Range: -20 to 85°C / -4 to 185°F
  • Non-Operating Temperature Range: <-40 to >85°C / <-40 to >185°F
  • Drift of sensitivity: 150 ppm/°C
  • Drift of zero point: ± 0.5 mg/°C
  • Ingress protection grade: IP67
Mechanical Data
  • Weight Without Cable: CG/198g, CO/237g for stainless steel; CG/107g, CO/146g for aluminium
  • Case Material: Stainless Steel or Aluminium
  • Mounting: 3.2 mm diameter holes (4x)
Ordering Information
  • Model: IAC-UHRS-Ud-02
  • Cable Length: Specified in meters
  • Casing: Stainless Steel or Aluminium
  • Sensing Axis: XY, XZ, YZ
  • Range: ± 3g or ± 5g
See more

Catalog excerpts

IAC-UHRS-Ud-02-1

SEISMIC ACCELEROMETER Background noise as low as 1 µg/√Hz Amplified  2.7 V differential output Embedded signal conditioning Compact and rugged design BLOCK DIAGRAM

 Open the catalog to page 1
IAC-UHRS-Ud-02-2

DIMENSIONS – Cable Gland Model NOTE When mounted with sensing axis vertical all units will indicate 1g M due to O RIN offsetONIT gravity. G DIMENSIONS – M12 Connector Model MOUNTING ACCESSORIES See “IAC – Accelerometer Accessories data s

 Open the catalog to page 2
IAC-UHRS-Ud-02-3

SPECIFICATIONS – ALL MODELS Output Range Supply Voltage Lower frequency limit Non-linearity Sensitivity Error Transverse Sensitivity Destruction limit Temperature Range ENVIRONMENTAL Drift of sensitivity CHARACTERISTICS Drift of zero point Ingress protection grade Weight Without Cable (g) Case Material Stainless Steel or Aluminium MECHANICAL DATA Stainless Steel Casing AISI316 Grade (e.g. for offshore/marine environment) Aluminium (MIL-A-8625 Type II coating) PERFORMANCES – BY MODEL Range - g Noise - µg/√Hz ELECTRICAL CONNECTIONS – Cable Gland Model Signal XY sensing Sensor supply + input Sensor...

 Open the catalog to page 3
IAC-UHRS-Ud-02-4

Sensor supply + input - Voltage differential output + Voltage differential output - Voltage differential output + Voltage differential output Sensor supply - input ELECTRICAL CONNECTIONS ORDERING INFORMATION IAC - UHRS - Ud - 02 - Cable Connection Cable Length Cable Gland Stainless Steel

 Open the catalog to page 4

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.