*mydirectindustry

IAC-U-03

1 / 4 PagesView full catalog

IAC-U-03

Product catalog summary

Properties

3-axis accelerometer suitable for direct connection to standard control and measurement equipment like PLCs or panel meters.
Embedded 0..3V signal conditioning with galvanic isolation and protection against false polarization.
Compact, rugged design with IP67 protection grade.

Output/Channel Specifications

Output range: 0-3.0 V with a supply voltage of 12-30 V.
Measuring range options: ± 2g or ± 6g with sensitivity of 0.6 V/g (± 2g range) or 0.2 V/g (± 6g range).
Frequency limits: Lower limit at 0 Hz (DC) and upper -3 dB frequency limit options of 100, 250, 500, or 1000 Hz.
Non-linearity: ± 0.5% F.S., residual noise: < 50 µg/√Hz, transverse sensitivity: < 5%.
Destruction limit: ± 5000g.

Environmental Characteristics

Operating temperature range: -20 to 85°C (-4 to 185°F).
Non-operating temperature range: <-40 to >85°C (<-40 to >185°F).
Temperature coefficient of sensitivity: ± 0.01 %/°C, temperature drift of zero point: ± 0.5 mg/°C.
Protection grade: IP67.

Mechanical Data

Weight without cable: CG/80, CO/125 for stainless steel; CG/46, CO/84 for aluminium.
Case material options: Stainless Steel (AISI316 Grade) or Aluminium (MIL-A-8625 Type II coating).
Mounting: 3.2 mm diameter holes (4x).

Electrical Connections

Cable Gland and M12 Connector models available.
Signal connections for X, Y, Z axes with specific color coding for sensor supply and outputs.

Ordering Information

Options for low pass filter frequencies (100Hz, 250Hz, 500Hz, 1000Hz) and cable lengths.
Casing options: Aluminium or Stainless Steel.
Measuring range options: ± 2g or ± 6g with 1st or 2nd order frequency options.

Catalog excerpts

ROBUST ACCELEROMETER BLOCK DIAGRAM 3 axes Suited for direct connection to standard control and measurement equipment, e.g., PLCs or panel meters. Embedded 0..3V signal conditioning Galvanically Isolated Protected against false polarization Compact and rugged design Protection

Open the catalog to page 1

DIMENSIONS – Cable Gland Model DIMENSIONS – M12 Connector Model MOUNTING ACCESSORIES See “IAC – Accelerometer Accessories data s

Open the catalog to page 2

SPECIFICATIONS – ALL MODELS Output Range Supply Voltage Measuring Range Lower frequency limit Upper -3 dB frequency limit Residual noise Transverse sensitivity Destruction limit Temperature range ENVIRONMENTAL CHARACTERISTICS Temperature coefficient of sensitivity ± 0.01 %/°C Temperature drift of zero point Weight Without Cable (g) MECHANICAL DATA Case Material Stainless Steel or Aluminium Protection grade Stainless Steel Casing AISI316 Grade (e.g. for offshore/marine environment) Aluminium (MIL-A-8625 Type II coating) ELECTRICAL CONNECTIONS – Cable Gland Model Signal X sensing Sensor supply...

Open the catalog to page 3