*mydirectindustry

IAC-MR-I-01

Product catalog summary

Overview: The document provides technical specifications and details for the Medium Resolution Accelerometer (4-20 mA), model IAC-MR-I-01. This accelerometer is designed for direct connection to standard control and measurement equipment, featuring a compact and rugged design with IP67 protection grade.

Properties:

Single-axis accelerometer.
Embedded 4-20mA signal conditioning.
Galvanically isolated and protected against false polarization.
Compact and rugged design suitable for harsh environments.

Specifications:

Output/Channel: Output range of 4-20mA with a supply voltage of 12-30 VDC. Measuring ranges include ±2g, ±4g, and ±8g with corresponding sensitivities of 3.53mA/g, 1.76mA/g, and 0.88mA/g respectively. The frequency limits range from 0 Hz (DC) to 1000 Hz.
Environmental Characteristics: Operating temperature range from -40 to 85°C. The device has a temperature coefficient of sensitivity of ±0.02%/°C and a temperature drift of zero point of ±0.1 mg/°C for ±2g and ±4g, and ±0.15 mg/°C for ±8g.
Mechanical Data: The resonance frequency is 2.4kHz. The case material options are stainless steel or aluminum, with different weights depending on the casing material.

Electrical Connections:

Cable Gland Model: Includes connections for X, Y, and Z axis outputs and sensor supply inputs.
M12 Connector Model: Provides a 4-20mA current output and sensor supply inputs.

Ordering Information: The document outlines the ordering codes for different configurations, including low pass filter options, cable length, casing material, and measuring range.

Catalog excerpts

MEDIUM RESOLUTION ACCELEROMETER (4-20 mA) BLOCK DIAGRAM 1 Axis Suited for direct connection to standard control and measurement equipment Embedded 4..20mA signal conditioning Galvanically Isolated Protected against false polarization Compact and rugged design Protection

Open the catalog to page 1

DIMENSIONS – Cable Gland Model DIMENSIONS – M12 Connector Model MOUNTING ACCESSORIES See “ IAC – Accelerometer Accessories data sh

Open the catalog to page 2

SPECIFICATIONS – ALL MODELS Output Range Supply Voltage Measuring Range Sensitivity Lower frequency limit Upper 3 dB freguency limit Residual noise (Typical) Transverse Sensitivity Destruction limit Operationg temperature Range ENVIRONMENTAL CHARACTERISTICS Temperature coefficient of sensitivity  0.02 % /°C Temperature drift of zero point Protection grade Resonance frequency Case Material Stainless Steel or Aluminium Weight Without Cable (g) MECHANICAL DATA Stainless Steel Casing AISI316 Grade (e.g. for offshore/marine environment) Aluminum (MIL-A-8625 Type II coating) All characteristics are...

Open the catalog to page 3