*mydirectindustry

IAC-HiRes-Ud-01

1 / 4 PagesView full catalog

IAC-HiRes-Ud-01

Product catalog summary

Properties

1-axis, low noise accelerometer with amplified +/- 4V differential output.
Compatible with standard control and measurement equipment such as PLCs and panel meters.
Features embedded signal conditioning, compact and rugged design, and IP67 protection grade.

Specifications

Output/Channel: Output range of ± 4V, supply voltage of 10-30 VDC, and a lower frequency limit of 0 Hz (DC). Non-linearity is ± 0.5% F.S., sensitivity error is 0.5% typical and 1% maximum, transverse sensitivity is 2% typical and 3% maximum, and offset is 0.2% F.S. typical and 0.5% F.S. maximum. Destruction limit is ± 5000g.
Environmental Characteristics: Operating temperature range is -40 to 125°C (-40 to 185°F) and non-operating range is <-55 to >125°C (<-67 to >257°F). Temperature coefficient of sensitivity is ± 0.03%/°C and temperature drift of zero point is ± 0.02% F.S./°C. Protection grade is IP67.
Mechanical Data: Weight without cable varies by model, with stainless steel or aluminium case material. Mounting requires 3.2 mm diameter holes (4x).

Performance by Model

Range and sensitivity vary by model, with frequency response and noise levels specified for each range from +/- 2g to +/- 400g.

Electrical Connections

Cable Gland Model: Includes connections for X, Y, and Z axis sensing, with specific wire color coding for sensor supply and axis outputs.
M12 Connector Model: Details pin assignments for sensor supply and voltage differential output.

Ordering Information

Model configuration includes options for cable length, connection type, casing material, range, and axis sensing.

Catalog excerpts

HIGH RESOLUTION ACCELEROMETER Amplified +/- 4V differential output Suited for direct connection to standard control and measurement equipment, e.g. PLCs or panel meters Compact and rugged design BLOCK DIAGRAM Embedded signal conditioning Protection gr

Open the catalog to page 1

DIMENSIONS – Cable Gland Model DIMENSIONS – M12 Connector Model MOUNTING ACCESSORIES See “IAC – Accelerometer Accessories data s

Open the catalog to page 2

SPECIFICATIONS – ALL MODELS Output Range Supply Voltage Lower frequency limit Sensitivity Error Transverse Sensitivity Destruction limit Operationg temperature Range ENVIRONMENTAL Temperature coefficient of sensitivity CHARACTERISTICS Temperature drift of zero point Protection grade Weight Without Cable (g) MECHANICAL DATA Case Material Stainless Steel or Aluminium Stainless Steel Casing AISI316 Grade (e.g. for offshore/marine environment) Aluminium (MIL-A-8625 Type II coating) PERFORMANCES – BY MODEL Range - g Noise - µg/√Hz ELECTRICAL CONNECTIONS – Cable Gland Model Signal X sensing Sensor...

Open the catalog to page 3

Sensor supply + input - Voltage differential output + Voltage differential output Sensor supply - input ELECTRICAL CONNECTIONS ORDERING INFORMATION IAC - HiRes - Ud - Cable Connection Cable Length Cable Gland Stainless Steel

Open the catalog to page 4

All Micromega Dynamics catalogs and technical brochures

Archived catalogs

ACTIVE DAMPING DEVICES PORTFOLIO
3 Pages