*mydirectindustry

IAC-HiRes-I-03

1 / 4 PagesView full catalog

IAC-HiRes-I-03

Product catalog summary

Properties

3-axes, low noise, high resolution accelerometer.
Compatible with standard control and measurement equipment like PLCs and panel meters.
Features embedded 4-20mA signal conditioning and galvanic isolation.
Protected against false polarization with a compact and rugged design.
IP67 protection grade ensures durability.

Specifications

Output/Channel: 4-20mA output range, 10-30 VDC supply voltage, 0 Hz lower frequency limit, non-linearity of ±0.5% F.S., sensitivity error of 0.5% typ. – 1% max., transverse sensitivity of 2% typ. - 3% max., offset of 0.2% F.S. typ. - 0.5% F.S. max., and a destruction limit of ±5000g.
Environmental Characteristics: Operating temperature range from -40 to 125°C, non-operating range below -55°C or above 125°C, temperature coefficient of sensitivity ±0.03%/°C, temperature drift of zero point ±0.02% F.S./°C, and IP67 protection grade.
Mechanical Data: Weight varies by model, case material options include stainless steel or aluminium, and mounting requires 3.2 mm diameter holes (4x).

Performance by Model

Various models offer different ranges, sensitivities, frequency responses, and noise levels, ranging from ±2g to ±400g with corresponding sensitivity and frequency response adjustments.

Electrical Connections

Cable Gland Model: Includes specific wiring for X, Y, and Z axis outputs and sensor supply inputs.
M12 Connector Model: Provides 4-20mA current outputs for X, Y, and Z axes, along with sensor supply inputs.

Ordering Information

Options include low pass filter frequencies, cable length, casing material (stainless steel or aluminium), and range specifications from ±2g to ±400g.

Catalog excerpts

HIGH RESOLUTION ACCELEROMETER (4-20mA) 3-axes, low noise, high resolution Suited for direct connection to standard control and measurement equipment, e.g. PLCs or panel meters Galvanically Isolated Protected against false polarization Compact and rugged design BLOCK DIAGRAM Embedded 4..20mA signal conditioning

Open the catalog to page 1

DIMENSIONS – Cable Gland Model NOTE When mounted with sensing axis vertical all units will indicate 1 g offset due to gravity DIMENSIONS – M12 Connector Model MOUNTING ACCESSORIES See “IAC – Accelerometer Accessories data s

Open the catalog to page 2

SPECIFICATIONS – ALL MODELS Output Range Supply Voltage Lower frequency limit Sensitivity Error Transverse Sensitivity Destruction limit Operationg temperature Range ENVIRONMENTAL CHARACTERISTICS Temperature coefficient of sensitivity  0.03 %/°C Temperature drift of zero point Protection grade Case Material Stainless Steel or Aluminium Weight Without Cable (g) MECHANICAL DATA Stainless Steel Casing Grade (e.g. for offshore/marine environment) Aluminium (MIL-A-8625 Type II coating) PERFORMANCES – BY MODEL Range - g Noise - µg/√Hz ELECTRICAL CONNECTIONS – Cable Gland Model Signal X sensing Sensor...

Open the catalog to page 3

4-20mA current output 4-20mA current output 4-20mA current output Sensor supply + input Sensor supply - input ELECTRICAL CONNECTIONS ORDERING INFORMATION IAC - HiRes - Cable Gland Cable Connection Stainless Steel Cable Length

Open the catalog to page 4

All Micromega Dynamics catalogs and technical brochures

Archived catalogs

ACTIVE DAMPING DEVICES PORTFOLIO
3 Pages