*mydirectindustry

IAC-HiRes-I-02

1 / 4 PagesView full catalog

IAC-HiRes-I-02

Product catalog summary

Properties:

2-axes, low noise, high resolution accelerometer.
Compatible with standard control and measurement equipment like PLCs and panel meters.
Features embedded 4-20mA signal conditioning and galvanic isolation.
Protected against false polarization with a compact and rugged design.
IP67 protection grade.

Specifications:

Output/Channel: 4-20mA output range, 10-30 VDC supply voltage, 0 Hz (DC) lower frequency limit, ± 0.5% full scale non-linearity, 0.5% typical sensitivity error, 2% typical transverse sensitivity, 0.2% full scale typical offset, ± 5000g destruction limit.
Environmental Characteristics: Operating temperature range from -40 to 125°C, non-operating range below -55°C or above 125°C, temperature coefficient of sensitivity ± 0.03%/°C, temperature drift of zero point ± 0.02% full scale/°C, IP67 protection grade.
Mechanical Data: Weight varies by model, stainless steel or aluminium case material, 3.2 mm diameter mounting holes.

Performance by Model:

Range and sensitivity vary from +/- 2g to +/- 400g with corresponding frequency response and noise levels.

Electrical Connections:

Cable Gland Model: Includes connections for XY, XZ, and YZ sensing with specific wire color coding.
M12 Connector Model: Provides 4-20mA current outputs and sensor supply inputs.

Ordering Information:

Options for cable gland or M12 connector, aluminium or stainless steel casing, various sensing axes, and low pass filter frequencies.

Catalog excerpts

HIGH RESOLUTION ACCELEROMETER (4-20mA) 2-axes, low noise, high resolution Suited for direct connection to standard control and measurement equipment, e.g. PLCs or panel meters Galvanically Isolated Protected against false polarization Compact and rugged design BLOCK DIAGRAM Embedded 4..20mA signal conditioning

Open the catalog to page 1

DIMENSIONS – Cable Gland Model NOTE When mounted with sensing axis vertical all units will indicate 1 g offset due to gravity DIMENSIONS – M12 Connector Model MOUNTING ACCESSORIES See “IAC – Accelerometer Accessories data s

Open the catalog to page 2

SPECIFICATIONS – ALL MODELS Output Range Supply Voltage Lower frequency limit Sensitivity Error Transverse Sensitivity Destruction limit Operationg temperature Range ENVIRONMENTAL CHARACTERISTICS Temperature coefficient of sensitivity  0.03 %/°C Temperature drift of zero point Protection grade Case Material Stainless Steel or Aluminium Weight Without Cable (g) MECHANICAL DATA Stainless Steel Casing AISI316 Grade (e.g. for offshore/marine environment) Aluminium (MIL-A-8625 Type II coating) PERFORMANCES – BY MODEL Range - g Noise - µg/√Hz ELECTRICAL CONNECTIONS – Cable Gland Model Signal XY sensing...

Open the catalog to page 3

4-20mA current output 4-20mA current output Sensor supply + input Sensor supply - input ELECTRICAL CONNECTIONS ORDERING INFORMATION IAC - HiRes - Cable Connection Cable Gland Stainless Steel Cable Length

Open the catalog to page 4

All Micromega Dynamics catalogs and technical brochures

Archived catalogs

ACTIVE DAMPING DEVICES PORTFOLIO
3 Pages