SS Models
4Pages

HIGH PRESSURE 10 Standard Sizes 3,000 PSI Up to 741,000 in/lbs of Torque VALVE OPEN—CLOSE CONTINUOUS ROTATION PROVIDING the “MUSCLE” for your lifting, turning, indexing, opening, closing, clamping, mixing, bending, testing, steering . . . applications. MATERIAL HANDLING

For larger aluminum units, please consult factory. INVOLUTE SPLINE FLAT ROOT - SIDL FIT SEE PAGE OA-2 FOR OPTIONAL TAPPED SHAFT ENDS AND POTENTIOMETER MOUNTING HOLES OPTIONAL KEYSEAT INDEX MARK INDICATES Q_ OF VANE & SPLINE TOOTH 1V UNIT SHOWN MID- STROKE For larger aluminum units, please consult factory. CUTOFF SHAFT SEE PAGE OA-2 FOR OPTIONAL TAPPED SHAFT ENDS AND POTENTIOMETER MOUNTING HOLES THREAD INLET & OUTLET OPTIONAL KEYSEAT INDEX MARK INDICATES Q. OF VANE & SPLINE TOOTH 1V UNIT SHOWN MID-STROKE ■ (4) MOUNTING HOLES EACH END AA " NOTE MODELS SS-1, SS-4 & SS-12 HAVE PORTS AS SHOWN...

APPLICATION DATA SINGLE VANE 280° ROTATION (±5°) DIMENSIONS IN INCHES (METRIC) SS-.2A DOUBLE VANE 100° ROTATION (±5°) APPROX. WEIGHT * ± .0005 in. (0.013 mm) SS-.2A, SS-.5A, SS-1 ± .00075 in. (0.019 mm) SS-4, SS-8, SS-12 ± .0015 in. (0.038 mm) SS-25, SS-40 ± .0025 in. (0.064 mm) SS-65, SS-130 ** ± .005 (.013 mm) *** Model SS-25 has (4) holes on a 90° pattern rotated 221/2° counter-clockwise *1 2000 PSI maximum is recommended for severe duty applications, such as operating at maximum torque at high cycle rates for extended periods. Please consult factory for applications beyond 2000 PSI....

Please fill in ALL blocks in accordance with the KEY numbers and letters shown below. B Buna "N" Standard shaft seal V Viton Standard shaft seal X Two piece end—Viton shaft seal buna seals Y Two piece end—Viton shaft seal viton seals Block 6 (SHAFT CONFIGURATION) A Standard (Involute spline & plain for SS) C Plain both ends D Plain one end—Single key other end E Plain one end—Double key other end F Plain end cut off—Single key other end G Plain end cut off—Double key other end H Single key both ends J Double key both ends K Spline one end—Single key other end L Spline one end—Double key...