video corpo

LAN9730(i) Sell Sheet

LAN9730(i) Sell Sheet

LAN9730(i) Sell Sheet

Product catalog summary
Overview: Microchip's LAN9730 is a high-performance, cost-effective USB to 10/100 Ethernet controller with a High Speed Inter-Chip (HSIC) interface. It supports USB 2.0 compliance and HSIC USB Electrical Specification Revision 1.0 compliance, offering speeds up to 480 Mbps. The device features Control, Interrupt, and Bulk-in/Bulk-out USB endpoints.
Key Features:
  • Single-chip HSIC USB 2.0 to 10/100 Ethernet controller.
  • Integrated 10/100 Ethernet MAC and PHY with HP Auto-MDIX support.
  • Supports commercial (0° to 70°C) and industrial (−40° to 85°C) temperature ranges.
  • 56-pin QFN, 8 × 8mm RoHS-compliant package.
  • External MII and Turbo MII for speeds up to 200 Mbps.
Applications: Suitable for embedded systems, set-top boxes, PVRs, USB port replicators, and test instrumentation.
Power Management: Features include low-power modes, Magic Packet, Wake-on-LAN, and Link Status Change wake events, which can initiate a remote USB wakeup. A PCI-like PME wake is supported when the USB host controller is disabled.
HSIC Interface: The low pin count interface reduces power consumption in devices like printers, mobile PCs, and tablets while maintaining USB connectivity.
Software Compatibility: HSIC software and drivers are backward-compatible with USB 2.0, ensuring a seamless transition.
UniClock Technology: Utilizes a single 25 MHz crystal, reducing BOM component count and cost.
Industrial Temperature Range: The LAN9730i variant is designed for rugged industrial environments.
Additional Services: Microchip offers LANCheck® online design review services for customers using their products.
Compliance: The device complies with IEEE 802.3 and 802.3u standards and supports auto-negotiation and auto-polarity correction.
See more

Catalog excerpts

LAN9730(i) Sell Sheet-1

LAN9730(i) High Speed Inter-Chip (HSIC) USB 2.0 to 10/100 Ethernet Controller Summary Microchip’s LAN9730 was specifically designed to provide a high-performance, low-cost USB to 10/100 Ethernet connectivity solution with a High Speed Inter-Chip (HSIC) interface. Taking advantage of the broad availability of existing USB drivers and software, Microchip’s proprietary HSIC technology incorporates a 2-pin digital bus that enables the use of USB as a low-power, chip-to-chip interconnect at speeds up to 480 Mbps. The internal device controller is USB 2.0-compliant and the HSIC interface is HSIC USB Electrical Specification Revision 1.0-compliant. The device implements Control, Interrupt and Bulk-in and Bulk-out USB endpoints. Microchip’s UniClock™ technology simplifies the clocking scheme and reduces system BOM costs by using a single 25 MHz crystal for both USB and Ethernet connectivity—without the need for additional components when adding USB hubs. Applications well-suited for the LAN9730 and LAN9730i (industrial temperature range option) include embedded systems, set-top boxes, PVRs as well as USB port replicators and test instrumentation. The LAN9730 also supports auto-negotiation, auto-polarity correction, HP Auto-MDIX* and is compliant with IEEE 802.3 and 802.3u standards. An external MII interface provides support for an external PHY which enables HomePNA® (HPNA) or HomePlug® functionality. Multiple power management features are provided, including various low-power modes, as well as Magic Packet, Wake-on-LAN and Link Status Change wake events. These events can be programmed to initiate a remote USB wakeup. A PCI-like PME wake is also supported when the USB host controller is disabled. Additionally, Microchip offers its complimentary and confidential LANCheck® online design review services to customers who select our products for their application design-in.** Embedded systems Set top boxes Printers Consumer electronics devices USB Port replicators Test instrumentation Multiple power management features enable overall system power reduction Various low-power modes, Magic Packet, Wake-on-LAN and Link Status Change wake events. These wake events can be programmed to initiate a remote USB wakeup. A PCI-like PME wake is also supported when the host controller is disabled. HSIC interface The low pin count interface enables printers, mobile PCs, ultra-mobile PCs, PCs and tablets to reduce their power budget while taking full advantage of USB connectivity. Software compatibility HSIC software and driver are fully backward-compatible with USB 2.0 software and drivers, enabling a seamless transition to HSIC. UniClock technology utilizing a single 25 MHz crystal Reduces BOM component count and cost Industrial temperature range (−40° to 85°C) option available (LAN9730i) Designed to perform in rugged industrial environments Single-chip HSIC USB 2.0 to 10/100 Ethernet controller Integrated 10/100 Ethernet MAC with full-duplex support Integrated 10/100 PHY with HP Auto-MDIX support Integrated USB 2.0 High Speed device controller Supports commercial (0° to 70°C) and industrial (−40° to 85°C) temperature ranges ■ 56-pin QFN, 8 × 8mm RoHS-compliant package ■ External MII and Turbo MII (available for speeds up to 200 Mbps) *HP Auto-MDIX eliminates the need for special “crossover” cables when connecting LAN devices together. **LANCheck online design review service requires an Microchip e-Services account and is subject to the terms and conditions stated on Microchip’s website.

 Open the catalog to page 1
LAN9730(i) Sell Sheet-2

LAN9730(i) Block Diagram HSIC HSIC Inteface FIFO Controller EEPROM Controller LAN9730(i) System Diagram Crystal Ethernet Magnetics Ethernet EEPROM (optional) www.microchip.com/usbsmsc Visit our web site for additional product information and to locate your local sales office. Microchip Technology Inc. • 2355 W. Chandler Blvd. • Chandler, AZ 85224-6199 Information subject to change. The Microchip name and logo, the Microchip logo, dsPIC, PIC are registered trademarks and MiWi, PICtail and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.