Catalogs >
Micro Sensor Co.,Ltd >
MPM4811 Level Transmitter with Temperature Output

MPM4811 Level Transmitter with Temperature Output
3Pages

Catalog excerpts

MPM4811 Level Transmitter with Temperature Output - 1

Features •Double standard output signal-level and temperature •Reversed-polarity protection •Level and temperature measurement •Protection IP68 •Automatic production line for quality guarantee, stable and reliable Introduction MPM4811 is full sealed submersible transmitter for level and temperature measurement with good quality. A high stable and reliable piezo-resistive pressure sensor and a Pt1000 temperature sensor are mounted with the high-performance signal processing circuit in the stainless steel housing. Advanced production technology and automatic production line ensure the stability of products, and good adaptation makes you device able to copy with various complex environments. It is suitable for level and temperature measurement and control in petroleum, chemical, power plant, city water supply and hydrology fields. Specification Range: 1,2,5, 10,20,50, 100,200mH2O; -20oC...0°C~L0°C...80oC; Overpressure: 1.5 times FS; Accuracy: ±0.5%FS (level); ±2 °C (temperature); Stability: ±0.2%FS/year Zero thermal drift: ±0.02%FS/°C FS thermal drift: ±0.05%FS/°C Operation Temp.: -20°C~80°C; Storage Temp.: -30°C~85°C Electric Connection: 3-wire (level & temperature double output) Power Supply: 12V~30VDC Output Signal: 4mA~20mA DC(level) + 4mA~20mA DC (temperature) Load(O): <(U-12V)/0.02A Construction Material Housing: Stainless Steel 1Cr18Ni9Ti Sealed Ring: Viton Cable: 97.2mm polyethylene or polyurethane cable Diaphragm: Stainless Steel 316L MICRO SENSOR CO.,LTD

Open the catalog to page 1

MPM4811 Level Transmitter with Temperature Output - 2

Electric Connection Transmitter is connected through cables. Code Others Yc MS200 water-proof connection box(suggested) Yd PD 140 lightening-proof protection device MICRO SENSOR CO.,LTD

Open the catalog to page 2

MPM4811 Level Transmitter with Temperature Output - 3

Note 1.Please make sure the measured media is compatible with contacting material; please pay attention to media density in the measurement (except water); 2. Polyethylene and polyurethane cables are optional and charged for materials and length; 3. If the product is installed in “lightning and thunder” area, please note “lightning-proof” in the order. We suggest to choose Lightning-proof Protection Device to protect transmitter. Please be sure good grounding as well; 4.Under standard conditions (4℃, g=9.80665 m/s2), the corresponding relationship between 1mH2O and pressure is showed as...

Open the catalog to page 3