MPM388 Piezoresistive Pressure Transducer MPM388 Piezoresistive Pressure Transducer Features ·Laser trimming compensating zero and FS thermal error; ·Used for non-conductive and non-corrosive liquid or gas; ·Optional constructions; ·Compact size, easy installation; ·Gauge, absolute and sealed gauge; ·Constant current supply; Introduction MPM388 pressure transducer is produced by build-in a piezoresistive pressure sensor into stainless steel housing with pressure ports. The measured pressure acts on silicon die through pressure port, transmitting pressure into voltage output signal by linearity relationship. Laser trimming hybrid compensates transducer zero, span and so on, the product is widely used for pressure calibration device, automobile, aviation, spaceflight, air pressure control and industrial measure, especially for transducer with pressure port HB4-3, it has been widely used for aviation industry. Outline Construction （Unit：mm） http: //www.microsensor.cn Add: No.18,Yingda Road Baoji,P.R.China, Tel: +86 917 3600739/3600832

MPM388 Piezoresistive Pressure Transducer http: //www.microsensor.cn Add: No.18,Yingda Road Baoji,P.R.China, 721006 Tel:+86 917 3600739/3600832 Fax: 3609977

MPM388 Piezoresistive Pressure Transducer Piezoresistive Pressure Transducer Code Pressure range Pressure range Pressure type Sealed gauge Code L Power supply Constant current supply Code Pressure port (customized ports are also optional) M12×1 male（flat head） ，Code Ⅱ（plug connection） M12×1 male（HB4-3） ，Code Ⅰ（with 1.5m cable） M10 male（ball head） ，Code Ⅲ（Φ0.45 Kovar） 1.5m cable is free of charge; the extra cable should be paid additionally; For your special use or requirements, please contact with our company freely.