MPM3808 Digital Output Pressure Transducer (V2.1) Sampling Frequency: 1.5ms Long Term Stability: ±0.3%FS/year Working Temperature: -10C~80C Storage Temperature: -40C~125C Shock: 10g,20Hz~2000Hz Impact:100g,11ms Features • Gauge, absolute, sealed gauge • Standard male thread for option • Isolated construction, enable to measure various liquid Introduction MPM3808 Digital Output Pressure Transducer is the OEM piezoresistive pressure sensor with 316L stainless steel corrugated diaphragm and isolated oil-filling construction. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing die. The pressure is transformed to analog electric signal. By customized integrated circuit for temperature compensation and non-linearity correction, it outputs pressure data and temperature data conforming to I2C interface protocol or SPI interface protocol. It is widely used for various liquid pressure measurement which is compatible with stainless steel and Viton. Specifications Range: -0.1MPa...0kPa~ 10kPa...3.5MPa Pressure Type: Gauge, Absolute, Sealed Gauge Overpressure: 1.5FS Accuracy: ±0.5%FS (pressure) ±1.5°C (Temperature) Power Supply: (5±0.1)V DC; (3.3±0.1)V DC Power supply current: 2.5mA (Normal) , 5uA (Low power standby) MICRO SENSOR CO.,LTD

MPM3808 Digital Output Pressure Transducer (V2.1) Wire color Order Guide MPM3808 Digital Output Pressure Transducer 1. Please pay attention that the measured media shall be compatible with contacted parts. 2. If Zero pressure is negative, please make special note of exact pressure range in purchase order. 3. For special requirements, please contact us and make note in purchase order. MICRO SENSOR CO.,LTD