MPM380 Piezoresistive Pressure Transducer Features ·Full stainless steel construction; ·Thread connection optional; ·Constant current supply; ·Laser trimming compensating zero and FS thermal error; ·Using high reliable and stable solid piezoresistive pressure cell; ·Cable connection or plug connection Introduction General MPM380 pressure transducer is produced by build-in an OEM piezoresistive pressure sensor into stainless steel housing. Due to stainless steel pressure port and housing, the product has good media compatibility, stable performance and high accuracy, it can be used for static gas and liquid media pressure measurement. Flush diaphragm MPM380 pressure transducer has G1/2 or M20×1.5 male pressure port and Viton sealed washer for fact type seal. Flush diaphragm MPM380 transducer has 070kPa…35MPa pressure range, it can be used for food, medicine, sanitation fields which is easy to be dirty. Specification @1.5mADC25℃ Pressure range 1.5 times FS or 110MPa (min.value is valid Power supply Signal Accuracy Long-term stability Compensation temp. Operation temp. Storage temp. Zero temp. coefficient Housing Diaphragm Stainless steel 1Cr18Ni9Ti Stainless steel 316L Response time 10%90% ≤1ms Insulation resistance Production http: //www.microsensor.cn Add: No.18,Yingda Road Baoji,P.R.China, Tel: +86 917 3600739/3600832

Outline Construction Unitmm Electric Connection Note: standard electric connection is plug connection; cableconnection is optional. http: //www.microsensor.cn Add: No.18,Yingda Road Baoji,P.R.China, Tel: +86 917 3600739/3600832

Piezoresistive Pressure Transducer Code Pressure range Pressure range Pressure type Sealed gauge Code Ⅰ Ⅱ Electric connection Plug connection Cable connection Cable 1.5m cable is free of charge; the extra lengthm cable should be paid additionally. Code Pressure port M20×1.5 male, face type seal Flush diaphragm, G1/2 male Flush diaphragm, M20×1.5 male M20×1.5 male, watline seal Order Note 1. We can also provide the user with voltage power supply product, the power supply is more than 9V; please note it when you select option codes; 2. Flush diaphragm transmitter’s pressure range: 070kPa…35Mpa;...