• Constructed with full stainless steel for durability and sealed for submersible measurement.
• Operates with a constant current supply and compensates for zero and span thermal errors using laser trimming.
• Equipped with a reliable and stable solid piezoresistive pressure cell.
• Includes a water-proof and oil-proof cable.

The MPM316W level transducer integrates a high-accuracy OEM gauge sensor within a stainless steel housing. It features a protective steel cap that allows liquid media to pass through while safeguarding the sensor diaphragm. The vented cable ensures atmospheric connection for precise measurements. This transducer is suitable for applications in city water supply, drainage, tanks, hydrology, reservoirs, rivers, and oceans.

• Pressure Range: 0 to 1…200mH2O
• Overpressure: 1.5 times Full Scale (FS)
• Power Supply: 1.5mADC
• Zero Output: Less than ±2mVDC
• Full Scale Output: ≥70mVDC or ≥25mVDC for ranges less than 2mH2O
• Accuracy: Minimum ±0.1%FS, Typical ±0.25%FS, Maximum ±0.5%FS
• Long-term Stability: ±0.3%FS/year
• Compensation Temperature: 0℃ to 50℃
• Operation Temperature: -10℃ to 80℃
• Storage Temperature: -40℃ to 100℃
• Zero Temperature Coefficient: ≤±0.02%FS/℃
• Full Scale Temperature Coefficient: ≤±0.02%FS/℃
• Housing Material: Stainless steel 1Cr18Ni9Ti
• Diaphragm Material: Stainless steel 316L
• O-ring Material: Viton
• Cable: Φ 7.2mm PVC
• Response Time: ≤1ms (10% to 90%)
• Insulation Resistance: 100MΩ at 100VDC
• Protection: IP68

The MPM316W transducer is available with a pressure range of 0 to 1…200mH2O. The cable length should be 1 to 2 meters longer than the measurement range. A fixed flange (F1) option is available.

• A 5m cable is included at no extra charge; additional cable length incurs extra cost.
• Refer to the MPM416W/WK/WRK datasheet for dimensions and installation of the F1 fixed flange.
• If the sensor has four wires, the white wire is omitted, but other wire connections remain unchanged.

• Black: +IN
• Yellow/Green: -IN
• White: -IN
• Red: +OUT
• Blue: -OUT