Features • Cost Effective, Small size • Chip from international famous brand; Laser Trimming for temperature compensation • Pressure range:0kPa-20kPa...3.5MPa • Gauge, Absolute • Constant current/ Constant Voltage power supply • Isolated construction, enable to measure various media • O 19mm standard OEM pressure sensor • Full stainless steel 316L • Gas, liquid pressure measurement Liquid pressure system and switch Aviation and navigation inspection Application • Industrial process control • Level measurement • Pressure checking meter • Pressure calibrator • Cooling equipment and air conditioning system Introduction MPM286 is an cost effective piezoresistive pressure sensor with small size. It has same outline, mounting dimensions and sealing methods as our other similar products, so it is highly interchangeable. It is widely used for pressure measurement of media which is compatible with stainless steel and Viton, especially the working site with limit installation space. Electric Performance Power supply: <2.0mADC; <10V DC Electric connection: Kovar pin Common mode voltage output: 50% of input (typ.) Input impedance: 2.5kO - 5kO Output impedance: 3.5kO - 6kO Response (10% - 90%): <1ms Insulation resistor: 100M0, 100VDC Overpressure: 1.5 times FS Construction Performance Pressure leading tube: stainless steel 316L Diaphragm: stainless steel 316L Housing: stainless steel 316L Pin: Kovar O-ring: Viton Net weight: - 11g MICRO SENSOR CO.,LTD

Environment Condition Shock: no change at 10gRMS, (20 ~2000)Hz Impact: 100g, 11ms Media compatibility: the gas or liquid which is compatible with construction material and Viton Basic Condition Media temperature: (25±1)0C Environment temperature: (25±1)C Shock: 0.1g (1m/s2)Max Humidity: (50%±10%) RH Local air pressure: (86 - 106)kPa Power supply: (1.5±0.0015)m ADC The suggested installation dimension is:® 19!°'°2 mm MICRO SENSOR CO.,LTD

Note: The actual electric connection method, please check the parameter label enclosed with products. Pressure Sensor Range code 0A 02 03 07 08 Range code Pressure range Pressure type Gauge Absolute Sealed gauge Code Pressure connection O-ring Code L Compensation Laser trimming Code Electric connection MICRO SENSOR CO.,LTD -3 -

1. We suggest you to use Suspended construction when you install the sensor to prevent affecting sensor stability; 2. Please pay attention to protect sensor isolated diaphragm and ceramic compensated board, to avoid damaging sensor or affecting the performance; 3. Temperature resistant range of standard Viton O-ring of sensor is -20 °C ~ 250 °C. When working temperature is lower than -20 C, or sensor is applied in critical environment, please contact us. MICRO SENSOR CO.,LTD