
The MFM500 Flow Switch monitors and controls liquid flow in tubes, providing switch output signals and displaying flow velocity via multi-LED indicators. It can detect media flow changes, presence, and stillness, and is used to monitor flow velocity, prevent pump racing, and protect devices in case of liquid runoff failure.
ApplicationsThe device features a M12×1 plug connection with specific pin color definitions for power supply and relay/transistor outputs. The relay and transistor characteristics include specific switch voltage and current ratings.
Setting IntroductionTo set the switch, install it and adjust the screw until the first green light illuminates, indicating the expected flow velocity. Adjust further for desired control point settings.
Order GuideThe MFM500 Flow Switch can be customized with various codes for pressure port, output signal, probe length, and electric connection. It is suitable for measuring water and oil, with special requirements available upon request.
MFM500 Flow Switch Features ■Full metal housing, no movable parts, no need to maintenance; ■Easy installation, suitable for different tube diameters; ■Switch output, control point setting continuously on panel; ■LED flicker and display flow and switch situation at real time. Brief Introduction MFM500 Flow Switch is able to monitor and control the liquid flowing of the tube at real time, providing switch output signal and display velocity of flow on multi-LED indicators. The monitoring functions are as follow: ■Media flowing, reduce/ increase velocity of flowing; ■Media exist/non-exist; ■Media flowing/stillness; The product could be used for monitoring velocity of flow, flow-cut or prevent pump racing. It is widely used for monitoring velocity of flow and fluid, or protecting the key device when the liquid runoff is failure in various industries. Applications ■Water and electricity industries, pump controlling in Water Distribution System; ■Metal processing industry, controlling flowing value of the refrigerant and the lubricant, liquid pressure and water supply system; ■Iron and steel industries, chemi-industries, pump racing protection and monitoring leaking and the level of the liquid; ■Beverage industries and monitoring purifying process. Specification Measure range: 1 ~ 150cm/s (water) , 3 ~ 300cm/s(oil) Working voltage: 24VDC±20% Consumption: < 90mA Output signal: Relay , PNP , NPN(three versions optional) - 1 -MICRO SENSOR CO.,LTD. http://www.microsensor.cn Address: No. 18 Yingda Rd., Baoji, 721006, Shaanxi, China Tel: +86 917 3600739 / 3600832 Fax: +86 917 3600755
Open the catalog to page 1Relay character: Transistors character: Switch voltage: Switch voltage: Switch current: Switch current: Response time: Temperature grades: 250℃/min(max) Protection: IP67 Media temp: -20℃~+80℃ Environment temp: -10℃~+70℃ Storage temp.: -20℃~+85℃ Endurance Pressure: 10MPa Construction material: stainless steel 1Cr18Ni9Ti Flow display: 6 LED indicators relay output Outline Dimension 1 24VDC+ brow n http://www.microsensor.cn Address: No. 18 Yingda Rd., Baoji, 721006, Shaanxi, China Tel: +86 9
Open the catalog to page 2Terminal Defination: green green green green yellow red O lights, flow cut or velocity of flow is lower than setti ng value, the relay opens. o ec green green green green yellow red o o when yellow indicator O lights, velocity of flow is equal to setting value, the relay works. o a o green green green green yellow red when yellow and green indicators light, velocity of flow is more than setting value, the more the indicators light, the more the velocity of flow is. Install switch and make the media flowing as the expected velocity of flow. Adjust the screw with screwdriver until the first green...
Open the catalog to page 3Code Pressure Port Code Output sina P PNP transistor output N NPN transistor output Code Probe length Code Electric connection B4 M12X1 plug ( with cable 1.5m ) MFM500 V1 C3 J L1 B4 the whole spec Order Note 1. The product is suitable to measure water and oil; 2. For special requirement, please feel free to contact our company. Address: No. 18 Yingda Rd., Baoji, 721006, Shaanxi, China micro sensor co.,ltd.
Open the catalog to page 45 Pages
3 Pages
6 Pages
6 Pages
2 Pages
2 Pages
4 Pages
4 Pages
4 Pages
3 Pages
3 Pages
3 Pages
3 Pages
3 Pages
3 Pages
4 Pages
3 Pages
29 Pages
25 Pages
4 Pages
3 Pages
3 Pages
6 Pages
2 Pages
2 Pages
3 Pages
3 Pages
2 Pages
4 Pages
7 Pages
4 Pages
2 Pages
4 Pages
24 Pages
5 Pages
3 Pages
3 Pages
3 Pages
3 Pages
4 Pages
3 Pages
2 Pages
3 Pages
5 Pages
3 Pages
4 Pages
4 Pages
3 Pages
2 Pages
2 Pages
5 Pages
3 Pages
3 Pages
7 Pages
4 Pages
3 Pages
2 Pages
1 Page
2 Pages
2 Pages
2 Pages
1 Page
4 Pages
6 Pages
4 Pages
2 Pages
3 Pages
10 Pages
12 Pages
5 Pages
13 Pages