MSB9418 Measurement Controller Features ·Full digital intelligent instrument; ·Used for all transmitters with standard output signal and bridge sensor with mV voltage signal; ·8 sections Nixietube, max display range -19999999999; ·Unit m, kPa, Mpa optional; ·Setting value save if power off; automatical read setting value and inspect display components; ·4 limits relay output; set control area and limit value freely; ·Standard series RS232/RS485 digital interface; full isolated current, voltage output; ·Basic value setting freely the displayed value at transmitter zero or the installation height above sea level; ·Two Micro Sensor Transmitter could be connected to measure level in seal tank or water-level difference between front and back of the trash rack; ·Two watchdog constructions, electromagnetism source isolation, strong anti-interference capability; ·For standard transmitter input, the instrument could be calibrated without power, easy for transmitter exchanging and local calibration; ·In pressure range, instrument could select transmitter output range freely to enlarge or shrink measure range; ·Wider power supply, reliable working in AC85VAC420V, especially for electric netting; ·Drawer construction, the core could be pull off from housing for easily repair and maintainance; ·Aluminum-alloy instrument housing, light weight and anti-electromagnetic radiation; Introduction MSB9418 measure instrument is mainly used for water conservancy, water and electricity and other industrial level and pressure measure and control, e.g. pool, well, tap water supply, tube, tank’s pressure measure and control as well as display and monitor. The product can also transmit data through series communication or isolated transmitter to centre control room or standard signal receiving device. Specifications Transmitter power supply: http: //www.microsensor.cn Add: No.18,Yingda Road Baoji,P.R.China, 721006 Tel: +86 917 3600739/3600832

MSB9418 Measurement Controller Sensor power supply: constant voltage or current Sampling speed: Transmitting output accuracy: ≤±0.5% ≤±0.5%/year Stability: Input signal: Transmitting output: full-isolated: 0/15VDC, 010/20mADC, 420mADC Display: 13mm(0.5 inch) 6 digit highlight red nixietube upper upper limit, upper limit, lower limit, lower lower limit, kPa, MPa, m (measure value + basic value) Communication interface: Power supply: Consumption: 8W Relay capacitance: 250VAC/7Aresistive load; 30VDC/7Aresistive load Relay quantity: Environment temp.: Environment humility: less than 90% Storage temp.:...

Typical Wiring Chart 2-wire 420mA output 1 Lower lower limit Lower limit Upper limit Lower lower limit Lower limit Upper limit Upper upper lim it Signal output DC24V power DC24V power Bridge sensor difference signal: 1 Lower lower limit Lower limit Upper limit Upper upper limit Signal output Signal output Sensor power Sensor power Double 420mA output transmitter: 1 Lower lower limit Lower limit Upper limit Upper upper lim it transmitter output transmitter transmitter http: //www.microsensor.cn Add: No.18,Yingda Road Baoji,P.R.China, 721006 Tel: +86 917 3600739/3600832

Measurement Controller Code Input signal 01000mV bridge output piezoresistive pressure sensor Code Single display Displaysound and light alarm Displaysound and light alarmupper, lower limit control Displayalarmupper upper, upper, lower, lower lower limits Output signal The default is no output 420mADC 15VDC 05VDC 020mADC RS232 interface RS485 interface Code Unit displayed kPa kPa MPa MPa m mH2O Order Note 1. Product control value could be local setted or note in the order, our company will set for the user; 2. Digital communication provides RS232 or RS485 interface, using ASCⅡ code for transmitting....